LG Electronics 50PG10, 42PG10 owner manual VCR Setup, Antenna Connection

VCR SETUP

■To avoid picture noise (interference), leave an adequate distance between the VCR and TV.

■Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period of time. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all TVs and is not covered by warranty.

Antenna Connection

1. How to connect

1	Connect the RF antenna out socket of the			ANTENNA/
	VCR to the ANTENNA/CABLE IN socket			CABLE IN
	on the TV.
			IO	1
			DVI)
2	Connect the antenna cable to the	RF
	antenna in socket of the VCR.			HDMI/DVI IN
				2
			R
2. How to use				1
■ Set VCR output switch to 3 or 4 and then
tune TV to the same channel number.
■ Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner’s
manual.)

ANT OUT	S-VIDEO	VIDEO	L	R
ANT IN	OUTPUT
	SWITCH

Wall Jack

2

Antenna

EXTERNAL EQUIPMENT SETUP

21