LG Electronics 37LD330H, 37LD340H, 37LD325H, 37LD345H, 42LD345H Optional Set the Clock, 7-6 + Enter

Page 238

Cloning Procedures (Cont.)

Learning / Teaching a Master TV Setup using a TLL-1100A Clone Programmer (Cont.)

(Optional) Set the Clock

Set the time on a Master TV’s clock. (If the time has already been copied from a TV into the TLL-1100A clone programmer, you can set the Master TV’s clock by copying the time from the clone programmer.) The TLL- 1100A can copy the current time to both a Master TV and to the clone’s internal clock—accurate to within one minute.

Since the TLL-1100A’s time cannot be set directly, the current time needs to be copied from an LG TV equipped with an enabled MPI port.

After the time is copied to the TLL-1100A clone programmer, the current time will be maintained and can then be transferred to another TV. (This can be a Master TV or another TV which has already had the features set up.)

CLONE SELECTION MENU

Selected Bank: CBankX Saved

(1)LEARN FROM TV

(2)TEACH TO TV

(3) SET CLONE CLOCK FROM TV

(4) SET TV CLOCK FROM CLONE

(5)DISPLAY TV SETUP

(6)DISPLAY CLONE SETUP

CLONE CLOCK = XX:XX

TV CLOCK = XX:XX

THE CLONE IS VERSION VX.X.X

-To change menu items, press channel keys or digits.

-To execute item, press Enter.

Teach Master TV Setup to Target TV

1.Ensure the Target TV is in Pass-through Mode, and then use the Installer Remote to enter the Target TV Installer Menu: Press MENU repeatedly until the on-screen setup menus lock up, and then press

9-8-7-6 + ENTER.

2.Set Installer Menu item 117 FACT DEFAULT to 001, and press ENTER. When the value changes back to 0, press ENTER again to exit the Installer Menu.

3.Tune/set the TV to an analog channel or Aux source, and then connect the MPI cable to the MPI port on the Target TV. The Clone Selection Menu will display on the TV screen.

4.Ensure the correct Memory CBank(X) is selected on the TLL-1100A.

5.Press 2 on the Installer Remote to select TEACH TO TV from the Clone Selection Menu. Then, press ENTER to transfer the Master TV Setup to the Target TV.

Teaching usually takes 3 to 4 minutes. “TEACHING IN PROGRESS” will be displayed on the screen during Teaching. When the Teaching process is complete, a “TEACHING COMPLETE” message will be displayed.

6.When Teaching is done, disconnect the MPI cable from the Target TV, turn OFF the TV, and unplug the TV power cord for 15 seconds.

7.Reconnect the TV power cord, and turn ON the TV. The Master TV Setup should be resident on the Target TV.

CLONE SELECTION MENU

Selected Bank: CBankX Saved

(1)LEARN FROM TV

(2) TEACH TO TV

(3)SET CLONE CLOCK FROM TV

(4)SET TV CLOCK FROM CLONE

(5)DISPLAY TV SETUP

(6)DISPLAY CLONE SETUP

CLONE CLOCK = XX:XX

TV CLOCK = XX:XX

THE CLONE IS VERSION VX.X.X

-To change menu items, press channel keys or digits.

-To execute item, press Enter.

26

206-4186

Image 238
Contents LCD TV FCC Notice Class B digital deviceImportant Safety Instructions Not to install the TV by the hanging powerOutdoor antenna grounding CleaningMoving NEC National Electrical CodeGenerated Sound Only Hg lamp used LCD TVDot Defect For LED LCD TV/ LCD TVContents 100 Clock SettingSet Password & Lock System 101Feature of this TV Some of these features are not available on all modelsAccessories Front Panel Information Back Panel Information 32/37/42LD320H, 32/37LD325H32/37LD310H Power Cord Socket AV Audio/VideoStand Instructions M4 xProtection Cover Vesa Wall Mounting 200Cable Management Swivel Stand Desktop Pedestal InstallationKensington Security System Attaching the TV to a Desk 32/37LD310H, 32/37LD330H Stand ScrewsPreparation Antenna or Cable Connection Antenna Analog or DigitalHD Receiver Setup Component ConnectionHdmi Connection Box to the HDMI/DVI in 1 jack on the TV DVI to Hdmi ConnectionConnect the DVI output of the digital set-top Connect the digital set-top box audio output toComponent Input ports DVD SetupComponent in Audio jacks on the TV Composite RCA Connection RJPVCR Setup Antenna ConnectionCamcorder TV using the Input button onRemote control Select the AV1 or AV2 input source onConnect the USB device to the USB After connecting the USB in jack, youUSB Connection Jack on the side of TVPC Setup VGA D-Sub 15 Pin ConnectionConnect the PC audio output to the Audio Input button on the remote controlConnect the DVI output of the PC to HDMI/DVI in 1 jack on the TVSupported Display Specifications RGB-PC, HDMI-PC Select the desired resolution Screen Setup for PC modeSelect Resolution Select PictureSelect Yes Select Auto ConfigStart Auto Configuration Select Screen RGB-PCAdjustment for screen Position, Size, and Phase Select Position, Size, or PhaseStart Reset Select ResetSelect Picture Remote Control Functions Watching TV / Channel ControlVCR/DVD Control video cassette recorders or DVD players Volume Adjusts the volumeColor Access special functions in some menus Eject Eject the USB device Ratio Change the aspect ratioAt this moment, the TV switches to standby mode Volume AdjustmentFirst, connect power cord correctly Turning on the TVAccept the current selection ON-SCREEN Menus SelectionSelect a menu item Return to TV viewingFor LD320H, LD325H, LD310H series For LD340H, LD345H, LD330H seriesRED Select Customer Support Customer SupportPicture Test / Sound Test Return to the previous menu Return to TV viewingReturn to TV viewing Product/Service InfoSelect Customer Support Return to the previous menuSelect Auto Tuning Channel SetupAuto Scan Auto Tuning Run Auto tuningAdd/Delete Channel Manual Tuning Select Manual TuningChannel Editing Switch to the chosen channel numberMove the pages when the channel list is Menu Select ChannelInput List Select the desired input sourceExample Electronic Program Guide Channel Label Select Channel LabelDemo Mode Connection Method USB ConnectionPrecautions when using the USB device Select MY Media This TV can view JPG image files or play Entry ModeOr Extra Contents MP3 audio filesOn-Screen Display on your model may be slightly different Photo ListScreen Components Supported photo file *.JPGMark Mode Photo SelectionSelect the desired photos More operations are available in full screen modeSelect the target folder or drive Selected photo is displayed in full sizeBGM, Rotate Zoom In, Option, or Hide Select the SlideshowOption Set values for Slide Speed and Music Album Enter Set Audio Using the Photo List FunctionSelect Set Photo View , Set Video , or Select Slide Speed or BGMSelect Picture Mode Select Sound Mode, Auto Volume, Clear Voice II, or BalanceMove to Photo List Music ListSelect Music List Music files are played Music SelectionMusic file Use the CH ꕌꕍ button to navigate in the musicShow the Option menu Using the Music List FunctionSelect Set Audio Play or Set Audio Select Repeat or Random Voice II , or BalanceExtra Contents Select Aspect Ratio Picture Size Aspect Ratio ControlSelect the desired picture format Set By Program 169Just Scan ZoomSelect Picture Mode Select Vivid, Standard, Cinema, Sport Preset Picture Settings Picture ModeOr Game Return to the previous menu Return to TV viewing Manual Picture Adjustment User Mode Picture Improvement Technology Advanced Control Select Advanced ControlAdvanced Control Signal is inputted through Hdmi This is produces richer colorsSelect Picture Reset Picture ResetInitialize the adjusted value Menu Select PictureSelect Auto Volume Auto VolumeSelect Audio Clear Voice Adjustment for Clear Voice Level with selecting OnSelect Level Make appropriate adjustments Menu Select AudioSound & Language Control BalancePreset Sound Settings Sound Mode Sound Setting Adjustment User Mode Adjust the sound to suit your taste and room situationsSelect Reset Return to TV viewing Audio ResetTV Speakers ON/OFF Setup Select TV SpeakerSelect Option Select Language This feature operates only in DTV/Cable DTV modeAudio Language Select Audio LanguageMenus can be shown on the screen in the selected language ON-SCREEN Menus Language SelectionSelect Menu Language Select CC1-4 or Text1-4 Caption ModeAnalog Broadcasting System Captions CaptionSelect CC1-4,Text1-4, or Service1  Digital Broadcasting System CaptionsCaption Option Select Digital OptionClock Setting Auto Clock SetupTime Setting Manual Clock SetupMon.~Sat. , Sat.~ Sun. , or Sun Auto ON/OFF Time SettingSelect Repeat Select and set Hour or MinuteSelect Sleep Timer Sleep Timer SettingAuto SHUT-OFF Setting Select Auto OffSET Password & Lock System Setting up Your PasswordEnter Select Lock Input the password Set PasswordChange the password by inputting a new password twice Select Set Password Choose any 4 digits for your newLock System Select Lock SystemChannel Blocking Select Block ChannelMovie Rating Mpaa Movie & TV RatingSelect Movie Rating Select TV Rating-Children Select Age or Fantasy Violence TV Rating ChildrenSelect Lock TV Rating General Downloadable Rating Select Downloadable RatingExternal Input Blocking Enables you to block an inputSelect Input Block Try another channel. The problem may be with the broadcast TroubleshootingInstall new batteries Directly at the TVNo output from one Adjust Balance in menu option Use normal MP3 fileMaintenance AppendixProduct Specifications ModelsIR Code Code FunctionOpen Source License Version 2, June104 105 106 GNU Lesser General Public License 108 109 110 111 Mozilla Public License 113 114 115 116 Model Serial 206-4163 Rev B Copyright 2011, LG Electronics U.S.A., IncFor Customer Support/Service, please call­ Important Safety Instructions Outdoor Antenna Grounding Table of Contents Setup Checklist Setup Checklist / OverviewCommercial Mode Setup Overview Information ProCentric TV Interactive Menu FeaturesChannel Guide Remote HelpLD320H/LD325H Rear Jack Panel AUDIO/VIDEORF Antenna & MPI Connections Side Connections Panel / RF Antenna & MPI ConnectionsSide Connections Panel 2 InputInstaller Remote Installer OverviewCloning Installer Remote Control Typical Key Functions Flashbk FlashbackSet Installer Menu items Commercial Mode Setup for Master TVSet up TV features Verify the TV setup Run Auto Tuning Channel SearchLock the channel lineup Using the Installer Menu Installer MenuAccessing the Installer Menu Exiting the Installer Menu and Activating UpdatesInstaller Menu Items 000 through Brief Description of Function and CommentsInstaller Menu Items 073 through CH not AvbleDetailed Descriptions of Installer Menu Items Installer SequenceSleep Timer AUX Status Procentric TV Setup Menus Overview Editing/Adding Channel Icons and/or Labels To perform channel editing/labelingFTG Mode of Operation FTG Configuration OverviewConfiguration Application manual for further information Delete FTG Installer Menu Configuration Utility Overview Installer DefaultsClonable Menu Features Cloning Overview / Clonable Menu FeaturesBefore you begin cloning Teach Master TV Setup to Target TV Cloning ProceduresLearn Setup from Master TV USB Cloning NotesTLL-1100A Cloning Notes Or CatvOptional Set the Clock LT2002 Cloning Notes LT2002 Clone ProgrammerFrom previous Remote Jack Pack Setup Remote Jack Pack / TV Connections & SetupTV Connections Checking the Software Versions Upgrading TV/PTC SoftwareSplash Screen Image File Guidelines Downloading a Splash Screen ImageReference Power Consumption Settings StaticCamport Operation Stand-alone Reference TV Camport Auto Sense OperationCamport Side Video Functionality Control Camport Operation FTG or PPVReference TV Aux Input Configuration EnableTV Standby State TV Power On State Reference b-LAN Setup & OverviewLAN Power 001 Default Off 007 RJP Model List Legacy Models Scaler Models Reference RJP Model List and Input Auto-sensing HierarchyRJP Input Auto-sensing Hierarchy Priority Video Audio Troubleshooting General TroubleshootingTroubleshooting Flow Chart Controller Quick CheckFTG Operation Troubleshooting Commercial Mode Check / FTG Operation TroubleshootingSymptom Possible Causes Solutions Symptom Possible Causes Possible Solutions Clone Programmer Clone Programmer TroubleshootingReset Clone Programmer After Static Shock Master and Target TVsGlossary of Terms OHM RF CableDocument Revision History Document Revision History / NotesDate Description For Customer Support/Service, please call­ 206-4177 Rev a Copyright 2011, LG Electronics U.S.A., IncPower Cord Polarization 206-4177 For products where thermal deformation is required Adding Channel Icons / Custom Channel Labels Setup Checklist / Commercial Mode Setup Overview ProCentric TV Interactive Menu Features LD310H Rear Jack Panel RGB in PC Connection for RGB output from PCAntenna Or Catv 206-4177 Returns one level to the previous menu/ display Fact Default Channel Navigation within the Installer Menu Changing Installer Menu SettingsInstaller Menu Items 000 through 091 YPrPb2 EN Set to 1 to enable Hdmi 2 input 094 Detailed Descriptions of Installer Menu Items Sleep Timer = Black = Cyan Back Lighting TV Setup Menus Overview Enter the TV Installer Menu Press Menu repeatedly Cloning Overview / Clonable Menu Features Updating TLL-1100A Cloning Notes Optional Set the Clock Cable, poor contacts, or other From previous FTG Mode Overview / Determining the TV Operating Mode Determining the TV Operating ModeFTG Mode of Operation Learning an FMA Configuration File from a TV Optional Manual Configuration / Setup for a TV FTG Channel Map Configuration Utility Overview FTG Channel Map Editor Overview FTG Installer Menu Configuration Utility Overview FMA Configuration Utility Overview V1.00.001 Splash Screen Image File Guidelines 32LD310H 37LD310H Power Reference TV Camport Auto Sense Operation Reference TV Aux Input Configuration Troubleshooting End Bad PPV Card Leave the TV set on Bad Go to Installer Menu Clone Programmer Troubleshooting Glossary of Terms Date Description January Revision a New Document For Customer Support/Service, please call 206-4186 Rev a 206-4186 Important Safety Instructions Outdoor Antenna Grounding Table of Contents Setup Checklist Setup Checklist / OverviewCommercial Mode Setup Overview Help LD340H/LD345H Rear Jack Panel AUDIO/VIDEOSide Connections Panel Side Connections Panel / RF Antenna Connection2 Input XxLD340H PTC Installer Menu 000 Number Buttons 0 9 & Dash Set up TV features Commercial Mode Setup for Master TVSet Installer Menu items Run Auto Tuning Channel SearchVerify the TV setup Lock the channel lineupUsing the Installer Menu Installer MenuAccessing the Installer Menu Exiting the Installer Menu and Activating UpdatesInstaller Menu Items 000 through Brief Description of Function and CommentsInstaller Menu Items 073 through CH not AvbleDetailed Descriptions of Installer Menu Items Installer SequenceSleep Timer AUX Status Procentric TV Setup Menus Overview Editing/Adding Channel Icons and/or Labels To perform channel editing/labelingClonable Menu Features Cloning Overview / Clonable Menu FeaturesBefore you begin cloning Teach Master TV Setup to Target TV Cloning ProceduresLearn Setup from Master TV USB Cloning NotesTLL-1100A Cloning Notes Or CatvOptional Set the Clock 7-6 + EnterLT2002 Cloning Notes LT2002 Clone ProgrammerFrom previous FTG Mode of Operation Overview FTG Mode via CPU or EBLDetermining the TV Operating Mode Aspect RatioFTG Mode via CPU Teaching FMA Configuration to a TV Learning an FMA Configuration File from a TV Optional Manual Configuration / Setup for a TV FTG Mode via EBL FTG Configuration Application Utilities Overview FTG Channel Map Configuration UtilityUpdate FTG Channel Map EditorFTG Installer Menu Configuration Utility Installer DefaultsFMA Configuration Utility Remote Jack Pack Setup Remote Jack Pack / TV Connections & SetupTV Connections Checking the Software Versions Upgrading TV/PTC SoftwareSplash Screen Image File Guidelines Downloading a Splash Screen ImageReference Power Consumption Settings StaticCamport Operation Stand-alone Reference TV Camport Auto Sense OperationCamport Side Video Functionality Control Camport Operation FTG or PPVReference TV Aux Input Configuration EnableTV Standby State TV Power On State Reference b-LAN Setup & OverviewLAN Power 001 Default Off RJP Model List Legacy Models Scaler Models Reference RJP Model List and Input Auto-sensing HierarchyRJP Input Auto-sensing Hierarchy Priority Video Audio FTG Mode via CPU Resetting a TV to Pass-through ModeFTG Mode via EBL Troubleshooting General TroubleshootingTroubleshooting Flow Chart Controller Quick CheckFTG Operation Troubleshooting Commercial Mode Check / FTG Operation TroubleshootingSymptom Possible Causes Solutions Symptom Possible Causes Possible Solutions Clone Programmer Clone Programmer TroubleshootingMaster and Target TVs Glossary of Terms OHM RF CableDocument Revision History Document Revision History / NotesDate Description May Revision a New document For Customer Support/Service, please call­
Related manuals
Manual 59 pages 59.38 Kb Manual 50 pages 29.7 Kb

26LD340H, 42LD320H, 37LD325H, 37LD310H, 42LD340H specifications

LG Electronics has established itself as a formidable name in the realm of consumer electronics, particularly in the television sector. Among its popular offerings are the models 26LD320H, 37LD345H, 32LD325H, 26LD345H, and 37LD340H. These models combine sophisticated technology with user-friendly features, catering to a diverse range of viewing preferences.

Starting with the 26LD320H, this compact LCD TV showcases a 26-inch screen, making it ideal for smaller living spaces or bedrooms. Its native resolution of 1366 x 768 pixels provides a crisp display, enhancing the viewing experience for standard-definition content and HD broadcasts. The TV features LG's Intelligent Sensor technology, which automatically adjusts picture settings based on surrounding light conditions, ensuring optimal brightness and color balance at all times.

Moving on to the 37LD345H, this model boasts a larger 37-inch display, perfect for living rooms and entertainment areas. With a resolution of 1920 x 1080 pixels, viewers can enjoy full HD content with enhanced clarity and detail. The 37LD345H is equipped with a built-in digital tuner, allowing viewers to access over-the-air HD broadcasts without the need for additional equipment. The TV also supports multiple HDMI inputs, making it easy to connect gaming consoles, Blu-ray players, and other devices.

The LG 32LD325H serves as a versatile option with its 32-inch screen, offering a balance of size and performance. This model supports both standard and high-definition content, resulting in a vivid picture quality that enchants viewers. The 32LD325H incorporates LG’s unique Picture Wizard technology, enabling users to fine-tune picture settings for their specific viewing environment.

The 26LD345H mirrors the innovative features of LG’s lineup with its stylish design and engaging 26-inch screen. It supports various input options including USB and HDMI, allowing users to connect to their favorite media devices seamlessly. Additionally, the inclusion of a robust sound system enhances the audio experience, making it a solid choice for video content and music alike.

Lastly, the 37LD340H offers an impressive 37-inch display and a similar set of features as its counterparts, appealing to those seeking a larger screen without compromising on quality. It is designed with full HD resolution and advanced sound capabilities to deliver an immersive viewing experience.

In summary, the LG Electronics series of televisions from the models 26LD320H, 37LD345H, 32LD325H, 26LD345H, to the 37LD340H, provides an array of options benefiting from modern technologies and stylish designs. They not only cater to varied room sizes and viewing needs but also ensure that consumers experience high-quality visuals and sound, aligning with LG's commitment to innovation and customer satisfaction.