LG Electronics 23LC1R* owner manual DTV Setup, PC Setup, DTV Receiver Set-top Box

Installation

DTV Setup

- To watch digitally broadcast programs, purchase and con- nect a digital set-top box.

COMPONENT (DTV/DVD IN) AUDIO

PC INPUT	ANT IN ( 75 ) PC SOUND
	H/P
VIDEO IN1	S-VIDEO

Connections

Connect the digital set-top box video outputs to the COM- PONENT (Y, PB, PR) jacks and connect the digital set-top box audio outputs to the AUDIO jacks.

Viewing Setup

1.Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)

2.Use the INPUT button on the remote control to select

Component.

Y PB PR (R) AUDIO (L)

DTV Receiver (Set-top Box)

Using Headphones

-Plug headphones in to H/P jack as shown.

-Adjust sound level to a headphone using the volume (F, G) buttons. While you are listening to sound through a headphone(s), TV speakers will not be heard.

PC Setup

ANT IN (75 ) PC SOUND

H/P

S-VIDEO

- After setup, be sure to select PC source on TV.

Connections

1.Set the monitor output resolution on the PC before connecting to the TV.

2.Connect the TV to the PC with the PC cable.

3.Connect the PC audio output to the TV's PC SOUND input.

Viewing Setup

1.Turn on the PC.

2.Use the INPUT button on the remote control to select PC.

Monitor Display Specifications

			Horizontal		Vertical
MODE	Resolution
			Frequency(kHz)		Frequency(Hz)
VGA	640x480	31.4		60
SVGA	800x600	37.8		60
XGA	1024x768	48.3		60
WXGA	1280x768	47.7		60
WXGA	1360x768	47.6		60

COMPONENT (DTV/DVD IN) AUDIO

PC INPUT	ANT IN ( 75 ) PC SOUND
	H/P
VIDEO IN1	S-VIDEO

NOTES

a. For optimum picture quality, use standard 1360x768@60Hz computer output at a 60Hz refresh rate . Using other formats (VGA, SVGA, etc.) or refresh rates may result in reduced picture quality. (To change the computer video output format, please refer to the operating manual for the computer you are using).

b. If the message “Out of range” appears on the screen, adjust the PC output to a format listed in the ‘Monitor Display Specifications' chart above.

c. The synchronization input form for Horizontal and Vertical frequencies is separate.

DPM (Display Power Management) mode

If the PC goes to power saving mode, the monitor automatically switches to DPM mode. If you don’t use the PC cable provided, DPM mode may not work.

16