LG Electronics 20LH1DC1 manual Commercial Mode, Cloning CONNECTIONS/LEARNING Setup

Page 52

COMMERCIAL MODE

CLONING CONNECTIONS/LEARNING SETUP

- Connections for the LT2002 Clone Programmer to Learn the 20LH1DC1 Master TV Setup

COMMERCIAL MODE

Antenna or CATV

Ferrite Core (TDK, ZCAT 2035-0930)

Warning: Do not use LT2002

 

 

if a LodgeNet PPV card is

 

 

installed in TV or clone

 

 

programmer device will be

Master 20LH1DC1

Clone Programmer

damaged.

 

 

*Note1: It is assumed that the 20LH1DC1 is connected to a signal source, the source selected is Antenna (RF) In, the signal is from an Analog channel, not a digital channel, all equipment is connected to power and turned on and the LT2002 Clone Programmer main menu (THE CLONE HAS CONTROL OF THE TV) menu is displayed on the TV screen, the clone programmer LED is blinking the required heart beat pattern, see above and next page.

*Note2: Once the clone is connected, do not touch the unit or otherwise disturb it or the MPI connections. Any disturbance while the clone is operating may disrupt the master setup transfer or copying etc.

Before you begin cloning...

The Master 20LH1DC1 should be connected to a good, stable signal from an over-the-air antenna or cable service Analog channel and connected to power. (See above.)

Teaching and Learning is only possible between identical model devices. (However, the LT2002 Clone programmer can store up to 3 different ‘master’ setups.)

WARNING: Copying a blank or incorrect memory into a TV, STB or other device will cause the TV, STB or other device to operate erratically or become inoperable.

Use an Installer’s remote to operate Learning and Teaching menus.

Make sure that the batteries in the Clone programmer are fresh.

If batteries are removed, the Clone Clock time will be lost.

Decide if you want to set the time from the Clone

programmer or copy the time to the Clone programmer; from a compatible TV which has the clock set to the current time.

Setting the time and transferring it to the Clone or other device is a separate procedure.

Follow the connection diagram above to connect the Clone to a Master 20LH1DC1-UB TV display panel. After learning is complete, to another identical 20LH1DC1-UB TV display panel to “teach” it the master setup.

After the 20LH1DC1-UBs setup has been copied to another identical 20LH1DC1, that identical unit with the copied setup, needs to be disconnected from power for about 15 seconds to activate the newly-copied setup.

See the Clone Troubleshooting section to resolve problems.

Turn to the next page to continue Cloning Setup.

52

Image 52
Contents Installation and Operating Guide Regulatory Information Cleaning and Disinfection Safety Instructions Important Safety InstructionsContents Preparation AccessoriesPreparation Front Panel Information Front Panel ControlsBack Panel Information PreparationHere shown may be somewhat different from your TV Installing a Vesa Standard Mount Swivel Bracket Vesa Wall MountingExternal Equipment Setup External Equipment SetupAntenna or Cable Connection Equipment Setup HD Receiver SetupConnect the digital set-top box to H DMI in jack on Set External Equipment Setup SetupConnect the DVI output of the digital set-top box to Hdmi in jack on the setDVD Setup ExternalVCR Setup When connecting with an antennaWhen connecting with a RCA cable PC Setup Connect the DVI output of the PC to the HdmiJack on the set Connect the PC audio output to the a Udio in jack on SetHDMI/DVI-PC mode HDMI/DVI-DTV mode 59.65Pillow Speaker Setup Keep pendant control away from oxygen equipmentUser Remote Control Button Functions Watching TV / Channel ControlInstaller Remote Control Button Functions Watching TV /CHANNEL ControlON-SCREEN Menus Selection SAP DisplayChannel Search Auto Program Channel SearchWatching TV ChannelChannel List Watching TV / ChannelChannel Labels Setup Add the label to the channelChecking the Strength of the Digital Signal Unstable ScreenTime Setting Clock SettingManual Time Settings TimeTime Setting Automatic Time SettingsTime Hours Minutes Time Zone Settings Time SettingDaylight Saving TV Activation Time Settings TV Deactivation Time SettingsAuto Off SET Password & Lock System Entering a PIN PasswordParental CONTROL/RATINGS Parental CONTROL/RATINGSSet Block Hour Parental CONTROL/RATINGSParental Movie & TV Ratings Tvpg RatingsRestricting movies by their rating Mpaa RatingsDescription of the Mpaa and TV FCC Rating Codes Canadian English Ratings Canadian French RatingsDownloadable Rating Sound & Language Control Caption / TextTurn Captions On/Off SoundDigital Font Options Digital Captions ModeSound & Language Control Preset Sound Settings Sound Setting Adjustment-User ModeSound Balance Setup Automatic Volume Control SettingsLanguage Left or RightAnalog Audio Settings Digital Audio Language SettingsUsing External Speakers Menu LanguageMenu Transparency Settings Set IDPreset Picture Settings Picture PresetColor Temperature Settings When finished, press the O K Enter buttonScreen Format Adjustments Manual Picture AdjustmentPicture Film Mode Options Use the a DJ D or E button to choose Film ModePicture Control Noise ReductionManaging the Channel Banks Channel BankChannel Bank Bank Channel BankBroadcast 2 Commercial Mode Channel Number PurposeChannel Number 101 104Installer Overview Commercial ModeMode Commercial Mode Setup Catv set to IRC set toCommercial Mode Cloning CONNECTIONS/LEARNING SetupClone PROGRAMMER/LEARNING Setup Learning the Master TV SetupCloning CONNECTIONS/TEACHING Setup Teaching the Master Setup to Another 20LH1DC1000 Installer Menu Installer Menu Items 035 throughDetailed Descriptions of Installer Menu Items Installer SequenceSpecifies entry sequence to the Installer Menu = HRCMute Disable Scan ModeSleep Timer Feature LevelValus Range from to = disable = 2 sec = 3 sec = 2.5 sec Poll RateTiming Pulse AUX StatusAtsc Band Atsc Tune ModeStart Minor Channel TV Features / Menus that can be Cloned PeferenceTo exit the menu when done press Menu Position or use Channel Up/DownDetailed Information For Making a Master TV Making a Master TVSoftware Version Check 20LH1DC1 Aux Input Configuration 20LH1DC1 Aux Input ConfigurationAppendix TroubleshootingAppendix Remote not in TV Mode Settings Software problemNot aimed at IR Cloning Procedure Troubleshooting Reset Clone After Static ShockAppendix 20LH1DC1 not turned onProcedure interrupted 20LH1DC1 not ResetClone should only scan Channels once Different TV modelsClone Troubleshooting Flow Chart TV Operating Check Glossary of Terms Installer Quick Setup Guide 1120 PMPage Product Specifications

20LH1DC1 specifications

The LG Electronics 20LH1DC1 is a well-regarded model in the realm of compact display technology, showcasing an array of robust features and advanced technologies that cater to both personal and professional needs. This model stands out for its balance between size, performance, and functionality, making it an excellent choice for various applications, whether for educational environments, gaming, or media consumption.

A key feature of the LG 20LH1DC1 is its high-definition display, offering vivid colors and sharp images that enhance viewing experiences. With a resolution that typically supports HD 1366x768 pixels, users can expect clear visuals that bring content to life. The panel technology employed in this model contributes to enhanced color accuracy and contrast ratio, making it suitable for diverse content types, from movies to presentations.

The design of the 20LH1DC1 is another noteworthy characteristic. Featuring slim bezels and a lightweight form factor, it allows for easy placement in a variety of settings. This portable profile is ideal for use in smaller spaces where traditional displays may be cumbersome. Additionally, the adjustable stand enables users to set the monitor at an optimal viewing angle.

Connectivity options are ample in the LG 20LH1DC1, accommodating a range of devices. It typically includes multiple HDMI ports, VGA, and audio inputs, allowing users to connect laptops, PCs, and other multimedia devices easily. This versatility ensures that the monitor can serve as a central hub for multiple sources of content.

Another significant aspect of the LG 20LH1DC1 is its energy efficiency. Designed with sustainability in mind, this model often complies with energy-saving standards, reducing consumption and minimizing environmental impact. Features such as auto power-off help conserve energy during periods of inactivity, making it an environmentally friendly option.

In conclusion, the LG Electronics 20LH1DC1 combines advanced display technology, versatile connectivity, and an efficient design to create a well-rounded monitor ideal for various applications. Its compact size does not detract from its performance, offering users a reliable choice for their display needs, whether at home, in the office, or in educational settings.