LG Electronics 20LH1DC1 manual Clone PROGRAMMER/LEARNING Setup, Learning the Master TV Setup

Page 53

CLONE PROGRAMMER/LEARNING SETUP

Learning the Master TV Setup

- Instructions for the Clone Programmer to Learn the Master 20LH1DC1 Setup.

Use MPI Cable to Connect LT2002 Clone Programmer to Master 20LH1DC1 MPI Port

If there is a good connection, “THE CLONE HAS CONTROL OF TV” message will appear. Press any button on the Installer remote.

Learn Setup from Master 20LH1DC1

Press 1 to select the “LEARN FROM TV” option, then press ON/OFF, POWER, or ENTER to go to the Memory Bank Selection Menu. Pick the Memory ”Bank” you want to store the master 20LH1DC1’s setup in by pressing either Channel button repeatedly to choose Memory 1, 2 or 3. (If you choose a Memory “Bank” that has a master device’s setup programmed into it, that setup will be overwritten by the new master 20LH1DC1’s setup.) Once the Clone memory bank is selected, press ON/OFF, POWER, or ENTER. The Clone memory bank you have selected will be shown. Press ON/OFF or POWER to begin copying the master 20LH1DC1’s setup.

Set the Clock (Optional)

Set the time on a Master TV’s Clock. (If the time has already been copied from a TV into the Clone programmer, you can set a master TV’s clock by copying the time from the Clone programmer.) The Clone Programmer can copy the current time to both a master TV and to the Clone’s internal clock; accurate to within one minute. (Another reason that the Clone programmer should be equipped with fresh, high-quality alkaline batteries, is for it to keep the time as accurately as possible.)

Since the Clone Programmer’s time cannot be set directly, the current time needs to be copied from a LG TV equipped with M.P.I. input capability.

After the time is copied to the Clone programmer, the current time can then be transferred to another TV. (This can be a master TV, or another TV which has already had the features set up.)

*Note: When using the clone programmer for teaching or learning,

be sure that the heartbeat pattern is shown on the LEDs. Both learning and teaching should take about 45 or more seconds depending on the complexity of the master setup. While the clone is functioning, do not move it or otherwise disturb the clone or wiring connections. If the clone finishes the function in less than 45 seconds, redo the function again. Press the reset button if the clone does not act normally.

THE CLONE HAS CONTROL OF THE TV

THE CLONE IS VERSION

XX

THE TV IS VERSION

XX

THE SW IS REVISION

XX

CLONE CLOCK=

XX:XX

TV CLOCK=

XX:XX

-PRESS ANY KEY TO CONTINUE.

-DISCONNECT CLONE WHEN DONE.

This menu should appear by itself after the LT2002 is connected to the 20LH1DC1 MPI port.

CLONE SELECTION MENU

(1)LEARN FROM TV

(2)TEACH TO TV

(3)SET CLONE CLOCK FROM TV

(4)SET TV CLOCK FROM CLONE

(5)DISPLAY TV SETUP

(6)DISPLAY CLONE SETUP

-TO CHANGE MENU ITEMS, PRESS CHANNEL KEYS OR DIGITS.

-TO EXECUTE ITEM, PRESS ON/OFF, POWER, OR ENTER

LT2002 Clone Programmer Communication Problems

A slow flashing green light indicates there are communication problems between the 20LH1DC1 and the LT2002 clone programmer. If this is the case, check for a damaged cable, poor contacts, or other connection troubles.

If the status indicator is red, the programmer batteries are low and should be replaced. Install 4 high-quality alkaline AA batteries.

COMMERCIAL MODE

53

Image 53
Contents Installation and Operating Guide Regulatory Information Cleaning and Disinfection Important Safety Instructions Safety InstructionsContents Preparation AccessoriesPreparation Front Panel Controls Front Panel InformationHere shown may be somewhat different from your TV PreparationBack Panel Information Vesa Wall Mounting Installing a Vesa Standard Mount Swivel BracketAntenna or Cable Connection External Equipment SetupExternal Equipment Setup Connect the digital set-top box to H DMI in jack on Set HD Receiver SetupEquipment Setup Setup External Equipment SetupConnect the DVI output of the digital set-top box to Hdmi in jack on the setExternal DVD SetupWhen connecting with an antenna VCR SetupWhen connecting with a RCA cable Connect the DVI output of the PC to the Hdmi PC SetupJack on the set Connect the PC audio output to the a Udio in jack on Set59.65 HDMI/DVI-PC mode HDMI/DVI-DTV modeKeep pendant control away from oxygen equipment Pillow Speaker SetupWatching TV / Channel Control User Remote Control Button FunctionsWatching TV /CHANNEL Control Installer Remote Control Button FunctionsSAP Display ON-SCREEN Menus SelectionAuto Program Channel Search Channel SearchWatching TV ChannelWatching TV / Channel Channel ListAdd the label to the channel Channel Labels SetupUnstable Screen Checking the Strength of the Digital SignalClock Setting Time SettingManual Time Settings TimeTime Hours Minutes Automatic Time SettingsTime Setting Daylight Saving Time SettingTime Zone Settings TV Deactivation Time Settings TV Activation Time SettingsAuto Off Entering a PIN Password SET Password & Lock SystemParental CONTROL/RATINGS Parental CONTROL/RATINGSParental Parental CONTROL/RATINGSSet Block Hour Tvpg Ratings Movie & TV RatingsDescription of the Mpaa and TV FCC Rating Codes Mpaa RatingsRestricting movies by their rating Canadian French Ratings Canadian English RatingsDownloadable Rating Caption / Text Sound & Language ControlTurn Captions On/Off SoundSound & Language Control Digital Captions ModeDigital Font Options Sound Setting Adjustment-User Mode Preset Sound SettingsAutomatic Volume Control Settings Sound Balance SetupLanguage Left or RightDigital Audio Language Settings Analog Audio SettingsMenu Language Using External SpeakersSet ID Menu Transparency SettingsPicture Preset Preset Picture SettingsColor Temperature Settings When finished, press the O K Enter buttonPicture Manual Picture AdjustmentScreen Format Adjustments Use the a DJ D or E button to choose Film Mode Film Mode OptionsPicture Control Noise ReductionChannel Bank Channel BankManaging the Channel Banks Broadcast 2 Channel BankBank Channel Number Purpose Commercial ModeChannel Number 101 104Mode Commercial ModeInstaller Overview Catv set to IRC set to Commercial Mode SetupCloning CONNECTIONS/LEARNING Setup Commercial ModeLearning the Master TV Setup Clone PROGRAMMER/LEARNING SetupTeaching the Master Setup to Another 20LH1DC1 Cloning CONNECTIONS/TEACHING Setup000 Installer Menu Items 035 through Installer MenuInstaller Sequence Detailed Descriptions of Installer Menu ItemsSpecifies entry sequence to the Installer Menu = HRCScan Mode Mute DisableSleep Timer Feature LevelPoll Rate Valus Range from to = disable = 2 sec = 3 sec = 2.5 secTiming Pulse AUX StatusStart Minor Channel Atsc Tune ModeAtsc Band Peference TV Features / Menus that can be ClonedPosition or use Channel Up/Down To exit the menu when done press MenuMaking a Master TV Detailed Information For Making a Master TVSoftware Version Check 20LH1DC1 Aux Input Configuration 20LH1DC1 Aux Input ConfigurationAppendix TroubleshootingAppendix Not aimed at IR Settings Software problemRemote not in TV Mode Reset Clone After Static Shock Cloning Procedure TroubleshootingAppendix 20LH1DC1 not turned on20LH1DC1 not Reset Procedure interruptedClone should only scan Channels once Different TV modelsClone Troubleshooting Flow Chart TV Operating Check Glossary of Terms 1120 PM Installer Quick Setup GuidePage Product Specifications

20LH1DC1 specifications

The LG Electronics 20LH1DC1 is a well-regarded model in the realm of compact display technology, showcasing an array of robust features and advanced technologies that cater to both personal and professional needs. This model stands out for its balance between size, performance, and functionality, making it an excellent choice for various applications, whether for educational environments, gaming, or media consumption.

A key feature of the LG 20LH1DC1 is its high-definition display, offering vivid colors and sharp images that enhance viewing experiences. With a resolution that typically supports HD 1366x768 pixels, users can expect clear visuals that bring content to life. The panel technology employed in this model contributes to enhanced color accuracy and contrast ratio, making it suitable for diverse content types, from movies to presentations.

The design of the 20LH1DC1 is another noteworthy characteristic. Featuring slim bezels and a lightweight form factor, it allows for easy placement in a variety of settings. This portable profile is ideal for use in smaller spaces where traditional displays may be cumbersome. Additionally, the adjustable stand enables users to set the monitor at an optimal viewing angle.

Connectivity options are ample in the LG 20LH1DC1, accommodating a range of devices. It typically includes multiple HDMI ports, VGA, and audio inputs, allowing users to connect laptops, PCs, and other multimedia devices easily. This versatility ensures that the monitor can serve as a central hub for multiple sources of content.

Another significant aspect of the LG 20LH1DC1 is its energy efficiency. Designed with sustainability in mind, this model often complies with energy-saving standards, reducing consumption and minimizing environmental impact. Features such as auto power-off help conserve energy during periods of inactivity, making it an environmentally friendly option.

In conclusion, the LG Electronics 20LH1DC1 combines advanced display technology, versatile connectivity, and an efficient design to create a well-rounded monitor ideal for various applications. Its compact size does not detract from its performance, offering users a reliable choice for their display needs, whether at home, in the office, or in educational settings.