BEFORE CALLING SERVICE
Please make these simple checks before calling service.These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty.
Symptoms | Items to Check and Actions to follow |
|
|
“Ghost ” or double image | *This may be caused by obstruction to the antenna |
| due to high rise buildings or hills. Using a highly |
| directional antenna may improve the picture. |
|
|
No power | *Check if the TV’s AC power cord is plugged into |
| the mains socket. |
| *Unplug the TV, wait for 60 seconds.Then reinsert |
| plug into the mains socket and turn on the TV |
| again. |
|
|
No picture | *Check antenna connections at the rear of the TV |
| to see if it is properly connected to the TV. |
| *Possible broadcast station trouble. |
| Try another channel. |
| *Adjust the contrast and brightness settings. |
| *Check the Closed Captions control. Some TEXT |
| modes could block the screen, |
|
|
Good picture but no sound | *Increase the VOLUME. |
| *Check if the TV is muted; press the MUTE button |
| on the remote control. |
|
|
Good sound but poor colour | *Adjust the contrast, colour and brightness |
| settings. |
|
|
Poor picture | *Poor picture quality may occur when an activated |
| |
| your TV and the other peripheral at the same |
| time. Switch off one of the peripherals. |
|
|
Snowy picture and noise | *Check the antenna connection |
|
|
Horizontal dotted line | *This may be caused by electrical interference (e.g. |
| hairdryer, nearby neon lights, etc.) |
| *Turn off the equipment. |
|
|
Television not responding to remote control | *Check whether the batteries are working. |
| Replace if necessary |
| *Clean the remote control sensor lens on the TV. |
| *You can still use the buttons at the front of your |
| TV. |
| *Select the TV mode to ensure your remote |
| control is set in the TV mode. |
|
|
28 | BUSH HD Ready LCD TV User Manual Customer Helpline 0845 604 0105 |