Audiovox FPE3208 manual Connecting a HIGH-DEFINITION HD Source, Connecting a PC

CONNECTIONS

CONNECTING A HIGH-DEFINITION (HD) SOURCE

High-Definition (HD) Devices with component video output must be connected to the YUV input. Connect the component video cable and audio cable (not included) as shown.

Make sure you connect the component video cable and audio cable from the other equipment (COMPONENT VIDEO OUT and AUDIO OUT) to this unit (COMPONENT VIDEO IN and AUDIO IN - YUV IN).

ToAUDIO IN jacks (YUV IN)

HD SOURCE

With component video output

(Digital Cable Box*, Satellite Receiver*,

or external over-the-air HD-Tuner).

To AUDIO

OUT jacks

COMPONENT

VIDEO IN

COMPONENT

VIDEO OUT

*May require a subscription for receiving HD channels. Check with your cable/ satellite service provider for details.

To	To COMPONENT
COMPONENT	VIDEO OUT jacks
VIDEO IN jacks
(YUV IN)

NOTE

When connecting a DVD player to the television, the picture resolution is solely dependent upon the resolution supported by the DVD player attached. DVD player resolutions vary from 480i to 1080i, and this unit can support DVD players up to a maximum resolution of 1080i.

CONNECTING A PC

Connect the 15-pin D-SUB PC/ VGA connector from your computer to the 15-pin D-SUB PC/ VGA input on this unit using a monitor cable and audio cable (not included) as shown.

Make sure you connect the cable from the computer (PC Connector and PC AUDIO) to this unit (PC IN MONITOR / VGA and AUDIO).

To PC AUDIO OUT jack

To PC connector

E - 10

PLV36320CS11_IB_Eng_1-13.pmd 10 13/09/2007, 17:27