TV Operation
Seek (Manual) UP/DOWN
The Seek Up/Down feature allows the user to manually tune to a TV channel. Press and hold the SEEK button for 2 seconds to access the Seek Mode. To use this button for Manual Tuning, press this button for 2 seconds and then tune the frequency by channel spacing. If a button is not pressed for 5 seconds, the mode will change back to SEEK mode.
•Memory: In order to memorize the TV channel as tuned manually, first press the SEEK UP/DOWN buttons and press and hold this button after finding the station. Then, the desired TV channel should be memorized.
Preset TV Channel Scan
(P.S/BSM button on the display or P.SCAN button on the remote control.)
This button is used to scan through preset TV channel. First select the desired TV band (TV1 or TV2) you would like to scan and then press and release either the P.S/BSM button or the P.SCAN to begin scanning within the selected TV Band for the desired TV Channel. The TV Tuner will search for stations of significant signal strength and store up to 30 of these stations automatically.
Stored TV Channel Deletion
Locate the TV Channels as shown on the monitor by using the direction buttons ( , , , ).
•Delete: First select a stored TV Channels to be deleted as shown on the display. Then press the DELETE button to erase it from stored memory.
Fine Tune
Press this button about 2 seconds or longer to tune the TV channel for a fine tuned picture.
53