Audiovox PAV2000DTV manual Connecting to the Multi Channel AV Control Unit System

8.Connect the Brown wire (8) to the Positive (+) of the Center Speaker.

9.Connect the Blue/Black wire (10) to the Negative (-) of the Navigation Sound

10.Connect the Blue wire (11) to the Positive (+) of the Navigation Sound

11.Connect the Green/Black wire (12) to the Negative (-) of the Left Rear Speaker.

12.Connect the Green wire (13) to the Positive (+) of the Left Rear Speaker.

13.Connect the Purple/Black wire (14) to the Negative (-) of the Right Rear Speaker.

14.Connect the Purple wire (15) to the Positive (+) of the Right Rear Speaker.

15.Connect the Brown/Black wire (16) to the Negative (-) of the Center Speaker.

Connecting to the Multi Channel AV Control Unit System

The Illustration on the following page is an example setup with the Multi Channel AV Control Unit System. The exact connection method will vary depending on the specific components selected for a particular installation. Please refer to the owner’s and installation manuals supplied with the associated equipment.

15