Manuals / TP-Link / Computer Equipment / Network Router

TP-Link TL-WR642G manual DHCP Clients List, Address Reservation

Models: TL-WR642G

1 67

Download 67 pages 63.65 Kb

Page 32

5.6.2 DHCP Clients List

TL-WR642G108M Wireless Router User Guide

Address. The range of the time is 1 ~ 2880 minutes. The default value is 120 minutes.

Default Gateway - (Optional.) Suggest to input the IP address of the LAN port of the router, default value is 192.168.1.1

Default Domain - (Optional.) Input the domain name of your network.

Primary DNS - (Optional.) Input the DNS IP address provided by your ISP. Or consult your ISP.

Secondary DNS - (Optional.) Input the IP address of another DNS server if your ISP provides two DNS servers.

Note: To use the DHCP server function of the router, you must configure all computers on the LAN as "Obtain an IP Address automatically" mode. This function will take effect until the router reboots.

5.6.2 DHCP Clients List

This page shows Client Name, MAC Address, Assigned IP and Lease Time for each DHCP Client attached to the router (figure 5-16):

Figure 5-16: DHCP Clients List

Index - The index of the DHCP Client Client Name - The name of the DHCP client

MAC Address - The MAC address of the DHCP client

Assigned IP - The IP address that the router has allocated to the DHCP client. Lease Time - The time of the DHCP client leased. Before the time is up, DHCP client will request to renew the lease automatically.

You cannot change any of the values on this page. To update this page and to show the current attached devices, click on the Refresh button.

5.6.3 Address Reservation

When you specify a reserved IP address for a PC on the LAN, that PC will always receive the same IP address each time when it accesses the DHCP server. Reserved IP addresses should be assigned to servers that require permanent IP settings. This page is used for address reservation (shown in figure 5-17).

- 28 -

Image 32

TP-Link manual DHCP Clients List, Address Reservation, TL-WR642G 108M Wireless Router User Guide

Contents

Page COPYRIGHT & TRADEMARKS 5.4.1 LAN 5.8.5 Remote Management Package contents TL-WR642G 108M Wireless Router User GuideChapter 1 About this Guide 1.1 Purposes1.2 Conventions 1.3 Overview of this User Guide2.2 Features Chapter 2 Introduction2.1 Overview of the Router TL-WR642G 108M Wireless Router User GuideTL-WR642G 108M Wireless Router User Guide 2.3 Panel Layout2.3.1 The Front Panel 2.3.2 The Rear Panel TL-WR642G 108M Wireless Router User GuideWireless antenna Factory Default Reset button There are two ways to reset the routers factory defaultsChapter 3 Connecting the Router 3.2 Installation Environment Requirements3.3 Connecting the Router 3.1 System Requirements108M Wireless Router User Guide Switch/HubRESET TL-WR642GTL-WR642G 108M Wireless Router User Guide Chapter 4 Quick Installation Guide4.1 TCP/IP configuration 4.2 Quick Installation Guide TL-WR642G 108M Wireless Router User GuideTL-WR642G 108M Wireless Router User Guide Figure 4-4 Login WindowsTL-WR642G 108M Wireless Router User Guide Figure 4-7 Quick Setup - PPPoETL-WR642G 108M Wireless Router User Guide In this page, you can configure the following wireless parametersChapter 5 Configuring the Router 5.1 login2. Wireless Radio, SSID, Channel, Mode, Wireless MAC address and IP address5.3 Quick Setup Please refer to Section 4.2 Quick Installation Guide5.4 Network TL-WR642G 108M Wireless Router User GuideTL-WR642G 108M Wireless Router User Guide 5.4.1 LAN5.4.2 WAN TL-WR642G 108M Wireless Router User Guide Figure 5-4 WAN - Dynamic IPTL-WR642G 108M Wireless Router User Guide Figure 5-4a WAN - 802.1X + Dynamic IPTL-WR642G 108M Wireless Router User Guide Figure 5-5a WAN - 802.1X + Static IPTL-WR642G 108M Wireless Router User Guide Connect Manually - You can configure the router to make it connect or disconnect manually. After a specified period of inactivity Max Idle Time, the router will disconnect your Internet connection, and not be able to re-establish your connection automatically as soon as you attempt to access the Internet again. To use this option, click the radio button. If you want your Internet connection to remain active at all times, enter 0 in the Max Idle Time field. Otherwise, enter the number in minutes that you wish to have the Internet connecting last unless a new link is requested5.4.3 MAC Clone TL-WR642G 108M Wireless Router User GuideTL-WR642G 108M Wireless Router User Guide 5.5 Wireless5.5.1 Wireless Settings TL-WR642G 108M Wireless Router User Guide Mode - Select the desired wireless mode. The options are5.5.2 MAC Filtering TL-WR642G 108M Wireless Router User GuideTL-WR642G 108M Wireless Router User Guide Figure 5-11 Wireless MAC address FilteringTL-WR642G 108M Wireless Router User Guide 6. Click the Save button to save this entry5.5.3 Wireless Statistics TL-WR642G 108M Wireless Router User GuideTL-WR642G 108M Wireless Router User Guide 5.6.1 DHCP Settings5.6 DHCP TL-WR642G 108M Wireless Router User Guide 5.6.2 DHCP Clients List5.6.3 Address Reservation To Reserve IP addresses To modify A Reserved IP addressTo delete all Reserved IP addresses TL-WR642G 108M Wireless Router User GuideTL-WR642G 108M Wireless Router User Guide 5.7 Forwarding5.7.1 Virtual Servers To setup a virtual server entry To delete a service entryTo delete all service entries To modify a virtual server entryTL-WR642G 108M Wireless Router User Guide Figure 5-20 Port Triggering Once configured, operation is as followsModifying an existing rule Deleting an existing ruleTo delete all rules 5.7.3 DMZ5.7.4 UPnP TL-WR642G 108M Wireless Router User GuideTL-WR642G 108M Wireless Router User Guide 5.8 Security5.8.1 Firewall 5.8.2 IP Address Filtering TL-WR642G 108M Wireless Router User Guide5.8.3 Domain Filtering TL-WR642G 108M Wireless Router User GuideTL-WR642G 108M Wireless Router User Guide 5.8.4 MAC Filtering TL-WR642G 108M Wireless Router User Guide5.8.5 Remote Management TL-WR642G 108M Wireless Router User Guide5.8.6 Advanced Security TL-WR642G 108M Wireless Router User GuideEnable ICMP-FLOOD Attack Filtering - Enable or Disable the ICMP-FLOOD TL-WR642G 108M Wireless Router User Guide5.9 Static Routing To add static routing entriesTo modify an existing entry 1. Modify the entry’s Destination IP Address, Subnet Mask and Gateway5.10 DDNS To delete all the entries5.10.1 Oray.net DDNS TL-WR642G 108M Wireless Router User GuideTL-WR642G 108M Wireless Router User Guide 5.11 System Tools5.10.2 Comexe.cn DDNS TL-WR642G 108M Wireless Router User Guide 5.11.1 Time5.11.2 Firmware 5.11.3 Factory Defaults TL-WR642G 108M Wireless Router User GuideTL-WR642G 108M Wireless Router User Guide 5.11.4 Reboot5.11.5 Password TL-WR642G 108M Wireless Router User Guide 5.11.6 Log5.11.7 Statistics Statistics Table TL-WR642G 108M Wireless Router User GuideTL-WR642G 108M Wireless Router User Guide Appendix A FAQ1. How do I configure the router to access Internet by ADSL users? 3. I want to use Netmeeting, what do I need to do? TL-WR642G 108M Wireless Router User Guide4. I want to build a WEB Server on the LAN, what should I do? TL-WR642G 108M Wireless Router User Guide5. The wireless stations cannot connect to the router TL-WR642G 108M Wireless Router User GuideAppendix B Configuring the PCs 1. Install TCP/IP component2. Configure TCP/IP for your computer TL-WR642G 108M Wireless Router User GuideAssigned by DHCP Sever TL-WR642G 108M Wireless Router User GuideSetting IP address manually TL-WR642G 108M Wireless Router User GuideTL-WR642G 108M Wireless Router User Guide Figure B-7 IP Address tabTL-WR642G 108M Wireless Router User Guide click Add button. Shown below Figure B-9 DNS Configuration tabAppendix C Specifications TL-WR642GGeneral Environmental and PhysicalAppendix D Glossary TL-WR642G 108M Wireless Router User GuideTL-WR642G 108M Wireless Router User Guide Domain Name - A descriptive name for an address or group of addresses on the InternetTL-WR642G 108M Wireless Router User Guide Appendix E Contact InformationE-mail support@tp-link.com