TP-Link manual MAC Filtering, TL-WR642G 108M Wireless Router User Guide

TL-WR642G108M Wireless Router User Guide

WEP Key settings - Select which of the four keys will be used and enter the matching WEP key information for your network in the selected key radio button. These values must be identical on all wireless stations in your network.

Key Type - You can select the WEP key length (64-bit, or 128-bit,or 152-bit) for encryption. "Disabled" means the WEP key entry is invalid.

•For 64-bitencryption - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not permitted) or 5 ASCII characters.

•For 128-bitencryption - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not permitted) or 13 ASCII characters.

•For 152-bitencryption - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not permitted) or 16 ASCII characters.

Encryption - When you select WPA-PSK or WPA for Authentication Type you can select either Automatic, or TKIP or AES as Encryption.

Figure 5-10a: WPA-PSK

WPA-PSK Passphrase - You can enter a WPA passphrase between 8 and 63 characters long.

Group Key Update Period - Specify the group key update interval in seconds. The value can be either 0 second or from 30 seconds or up, 1-29 seconds is not a usable second. Enter 0 to disable the update.

Figure 5-10b: WPA

Radius Server IP - Enter the IP address of the Radius Server

Radius Port - Enter the port that radius service used.

Radius Password - Enter the password for the Radius Server.

Be sure to click the Save button to save your settings on this page. Note: The router will reboot automatically after you click save.

5.5.2 MAC Filtering

The Wireless MAC Filtering for wireless networks are set on this page, figure 5-11:

- 23 -