TP-Link TL-WR642G manual I want to build a WEB Server on the LAN, what should I do?

TL-WR642G108M Wireless Router User Guide

Figure A-5 DMZ

4.I want to build a WEB Server on the LAN, what should I do?

1)Because the WEB Server port 80 will interfere with the WEB management port 80 on the router, you must change the WEB management port number to avoid interference.

2)To change the WEB management port number: Login to the router, click the “Security” menu on the left of your browser, and click "Remote Management" submenu. On the "Remote Management" page, type a port number except 80, such as 88, into the "Web Management Port" field. Click “Save” and reboot the router.

Figure A-6 Remote Management

Note: If the above configuration takes effect, to configure to the router by typing

http://192.168.1.1:88 (the router’s LAN IP address: Web Management Port) in the address field of the web browser.

3)Login to the router, click the “Forwarding” menu on the left of your browser, and click the "Virtual Servers" submenu. On the "Virtual Server" page, enter “80” into the blank below the “Service Port”, and your IP address below the IP Address, assuming 192.168.1.188 for an example, remember to “Enable” and “Save”.

- 53 -