To add or modify a MAC Address Filtering entry, follow these instructions:
1.Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is
2.Enter a simple description of the wireless station in the Description field. For example: Wireless station A.
3.Privilege - Selects the privileges for this entry, one of Allow / Deny /
4.WEP Key - If you select
5.Status - Select Enabled or Disabled for this entry on the Status
6.Click the Save button to save this entry.
To add additional entries, repeat steps
Note: When
To modify or delete an existing entry:
1.Click the Edit or Delete button in the Modify column in the MAC Address Filtering Table.
2.Enter the value as desired in the Add or Modify Wireless MAC Address Filtering entry page, and click the Save button.
You can click the Enable All button to make all the entries effective, click the Disable All button to make all the entries ineffective, click the Delete All button to delete all the entries.
Click the Next button to go to the next page and click the Previous button to return to the previous page.
For example: If you desire that the wireless station A with MAC address
1.Click the Enable button to enable this function.
2.Select the radio button: Deny the stations not specified by any enabled entries in the list to access for Filtering Rules.
3.Delete all or disable all entries if there exist any entries already.
4.Click the Add New... button and enter the MAC address
5.Click the Add New... button and enter the MAC address
- 25 -
