INSTALLATION
REMOVING THE BASE STAND
WARNING: The LCD display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp objects, or anything that could scratch or damage the LCD display, come in contact with it. Do NOT place pressure on the rear of the unit at anytime because the screen could crack.
1.Disconnect any cables or cords connected to the unit.
2.Lay the unit down on a flat surface, so the back side is facing up, making sure to place a soft cushioned material (such as a pillow or thick piece of foam) beneath the screen.
3.Remove the 3 screws and then remove the BASE STAND from the unit.
MOUNTING ON THE WALL
This unit is
NOTE
Remove the base stand before mounting the unit on the wall.
WALL MOUNTING HOLES : 35 X 75 MM
WALL MOUNTING HOLES : 35 X 75 MM
USING HEADPHONES
•Turn down the volume before connecting headphones to the unit, then adjust the volume to your desired level.
•When headphones are connected, no sound will come from the front speakers.
NOTE
Avoid listening to sound at high levels for prolonged periods of time. This may be harmful to you and may cause hearing loss.
Headphones (1/8” [3.5mm] diameter plug)
E 10