Basic Operations
On-screen Menus Language Selection
The menus can be shown on the screen in the selected language.
First select your language.
Press MENU and then use 4or3 to display SYSTEM SETUP
1 menu page, press 6to enter.
2 Press 6or 5 to select Language item, press 3or4 to select your desired language.
3 Press EXIT button to return to TV viewing.
SYSTEM SETUP | |
Language | English |
Screen Saver | OFF |
Transparency | 000 |
OSD Time Out | 010 |
Clock Setup | > > > |
Source Name Edit | > > > |
Close Caption Setup | > > > |
Selecting Input Source Signal
1 | Press the INPUT button to display INPUT SELECT menu. | ||
2 | Press 6or 5to select your desired input source, press OK to confirm. | ||
3 | Press INPUT button to clear the screen. | ||
| TV | Select TV signal. | |
| |||
| Select signal from AV INPUT2 terminals. | ||
| |||
| |||
| Analog | Select signal from VGA input interface. | |
| Select signal from HDMI1 input interface. | ||
| Select signal from HDMI2 input interface. |
INPUT SELECT |
TV |
AV1/SVideo |
AV2 |
Component1 |
Component2 |
Analog RGB |
HDMI1 |
HDMI2 |
Up/Down:Change |
OK:Select Input:Exit |
Note:
You may also make use of OSD main menu (CHANNEL SETUP menu) to select the input source.
You can edit source name to your preference (refer to "System Setup" section).
Information Banner
You can press INFO button to call up information banner. The information banner will display current status information such as channel number or signal source, etc.
In DTV mode, it will display the following information:
-Channel number and name.
-Air or Cable.
-Resolution.
-Current time.
-Caption icon (if closed caption is turned on), Clock icon (if timer has been setup).
-Current program broadcast progress.
-Current program start and end play times.
Note:
Some DTV programs’ information banner may not contain all the above information. It will vary depending on the broadcaster and your setting.
19