Audiovox FPE4707HR Sound Mode Selection, Stereo/SAP Broadcasts Setup only for analog channel, Sap

Setting Sound

Sound Mode Selection

You can select the sound quality instantly among three preset modes and one user-set mode.

Press the AUDIO button repeatedly to select the desired sound quality. NEWS, USER, MOVIE and MUSIC can be selected cyclically.

NEWS: Select for a speech or conversation program.

MOVIE: Select for a movie program.

MUSIC: Select for a music program.

USER: The sound quality you set.

Stereo/SAP Broadcasts Setup (only for analog channel)

-This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program; if the station transmits an additional sound signal as well as the original one.

-Stereo or SAP can be selected only when the TV station transmits these signals.

-Mono sound is automatically received if the broadcast is only in Mono.

-Select Mono if you are having difficulty receiving a stereo signal.

1When viewing analog channel, press the MTS/SAP button to call up the AUDIO MODE menu.

2Press 5or6to select your desired MTS mode: Mono, Stereo or SAP, then press

OK to confirm.

AUDIO MODE

Mono

Stereo

SAP

Note: In multi window mode, Stereo or SAP can be selected only for main picture.

Digital Audio Mode Selection (only in DTV mode)

-The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example,

simultaneous translations of the program into foreign languages).

AUDIO MODE

-The availability of these additional "multitracks" depends upon the program.

1. Audio: eng

2. Audio: fre

1 When viewing digital channel, press the MTS/SAP button to call up the AUDIO MODE menu.

2 Press5or6to select your desired audio mode option, then press OK to confirm.

(The above OSD is only served

as an illustration. It may be different

in different situation)

Note: In multi window mode, the MTS/SAP button only can be used for the main picture.

26