OPERATION
Initial Setup: This unit defaults to cable TV mode. When the unit is first powered on, it will detect the cable system and
CHANNEL TUNING SET UP
In addition to normal broadcast reception of VHF and UHF channels, if you are Cable TV subscriber, your new TV is capable of receiving many unscrambled Cable channels without the use of a converter box. When set to broadcast TV, it receives
After a power interruption, the unit will go into a cable mode search (HRC, IRC, STD) and channel search mode automatically. During this time the unit will not respond to any button at all. The unit will respond normally once the cable mode and channel search mode is concluded.
POSITIONING THE SCREEN
Pivot the screen forward until a comfortable viewing angle is reached. The screen may also be rotated from side to side. Do not force the screen beyond its rotational limit. The VE700 is now ready for use. Pressing the PWR button on the TV or the remote will turn the system on or off. Remember to turn the unit off and pivot the screen to the closed position when not in use.
SETTING THE TIME
NOTE: All settings will be performed with the VE700 turned off. (Except SETTING THE PRESETS).
1)Press the SET button and the minutes will flash.
2)Use the CH up/down button to set the minutes.
3)Press the SEEK button to toggle between the hour and minutes.
4)Use the CH up/down button to set the hour. (Check AM/PM indicator)
5)Press the ON/Off button or T/F to return to the time display.
-16 -