Beko 26WLZ530HID operating instructions Start, Performing initial start and settings, Batteries

Page 9

4Start

Remove your television carefully from its box. You can keep the packaging of your television to use in future.

Contents of the box

Power cable Remote control 2 batteries

Note: Scart, HDMI, VGA and PHONO cables are not supplied with the device.

4.1-Aerial connection

4.2-Powering on your device and the initial use

1.Insert the power cable into the power supply input located on the back panel of the

LCD TV.

2.Insert the power cable plug supplied with the tv into the mains socket.

Note: Your TV is equipped to operate with TV buttons in case your R/C is broken or the batteries are exhausted.

3.Press the Standby on/off button located on the LCD TV , or

4.Press PR+ or PR- keys on the remote control. For this process,

you can also use the buttons on your TV. The picture will appear on the screen after a short while.

Note: If you are not going to use

your television for a long time, unplug its power cable from the socket.

4.3-Performing initial start and settings

To set up your television, read the sections on the TV controls and making the channel settings.

4.4-Batteries

Open the lid of the battery compartment and make sure that you have placed the batteries in the correct direction. For this remote control, UM-4, IEC R03 or AAA 1.5 V batteries are suitable.

Do not throw your old batteries into the fire, discard them in a dedicated waste area for this purpose.

Do not mix used batteries with new ones or different types of batteries together.

The performance of the remote control will be reduced at a distance of 8 meters from or at an angle of 30 degrees beyond the centre of the TV.

7

Image 9

Contents Operating Instructions Table of Contents Disposing of your TV at the end of service life Cleaning the screen and cabinetSuperior features of your integrated digital television Important InformationChanging the plug Special Features Features of your new television Make Sure that all Important Safety InstructionsProduct, then it must be connected to a grounded socket Page Performing initial start and settings StartBatteries Your new television TV Control PanelRear and Side External Connections TXT Swap Freeze Size PIP/POS Remote ControlTV controls Performing the initial power-on settingsPerforming Digital channel settings Turning on your television for the first time and tuningManual tuning of digital channels and storing in the memory Performing Analogue channel settingsFine Tuning Electronic TV Guide EPGIf you do not know the channel number Selecting the Service Type Program tableCreating and selecting favorites list Deleting a stored channel Relocating a stored channelLocking a stored channel Skipping a stored channelCA Module Conditional Access Signal InformationActive Antenna Power Channel ListPerforming the Sound settings Settings on your new televisionPerforming the Picture settings Mpeg NR DNR Noise reductionVibrant Colour Perfect ClearPerforming the timer settings Options menu settings Parental Control Other picture features Teletext Temporary TV Picture Update Question Answer Button RevealFastext Connecting an external device via Scart connection External Equipment ConnectionsHeadphone Connection Connecting external equipment via AV connection Connecting an external device via S-Video connectionConnecting an external device via Ypbpr connection PC connection Connecting an external device via Hdmi connectionHdcp High Definition HD-READYInserting the CI Common Interface card Help and tips Failure Possible cause SolutionTFT Technical Specifications ChartMain UK Transmitter Stations What is covered? Guarantee TelevisionWhat is not covered? Important notes0845 600 HOW to Obtain ServiceV8K.801