Beko 26WLZ530HID Settings on your new television, Performing the Sound settings

Page 19

7The settings on your new television

7.1-Performing the Sound settings

You may perform Volume settings by using the V+ or V- buttons on your television or the VOL+/VOL- buttons on your remote control. You can perform other Sound settings by entering the Sound menu. To do this, press the MENU button on your remote control, select SOUND menu by pressing the Right/ Left movement buttons and press the OK button. In this menu, you can select one of the titles for which you would like to perform an operation.

7.1.3-Sound Type

The program you watch may be broadcast in stereo or in two different languages. Using the Right/Left movement buttons in this menu, you can select Mono/Stereo or Dual-1/ Dual-2.

7.1.4-Sound Mode

If you would like to add some depth to the sound of the program you are watching, press Right/Left movement buttons to select Normal or Spatial feature.

7.1.5-Equalizer

Select the EQUALIZER tab in the Sound menu and confirm with the OK button. The Equalizer menu is displayed.

 

SOUND

Volume

 

Balance

 

AVL

Off

Sound Type

L+R

Sound Mode

Normal

Equalizer

 

Headphone

 

Select

Back

Exit

 

7.1.1-Balance

To adjust the sound balance between the right and left loudspeakers to the desired level, select the Balance tab in the volume menu by using the Down movement button. Using the Left/Right movement buttons adjust this option to the desired level.

7.1.2-AVL (Automatic Volume Limiting)

Television transmitters have different sound levels. This can be noticed from the different volume levels that can be heard while switching from one program to another. Using the Right/Left movement buttons, select ON. The AVL (Automatic Volume Limiting) function maintains the same sound level as you switch from program to program. Select Off to cancel it.

EQUALIZER

<

User

<

Select

Back

Exit

 

Using the Right/Left movement buttons, you may select either one of the preset Music, Sports, Cinema and Speech options which enhance the sound effect depending on the feature of the program you are watching

or the User option which you can adjust as you desire. To adjust the User option, select User and press the OK button. You can adjust the frequency levels with the Up/ Down movement buttons. You can select one of the 120Hz, 500Hz, 1.5kHz, 5kHz and 10kHz frequency bands with Right and Left movement buttons. Press the MENU button to store the settings and exit the user option.

Note: You can select the equalizer options directly by pressing the ( ) button on your remote control.

17

Image 19
Contents Operating Instructions Table of Contents Important Information Cleaning the screen and cabinetDisposing of your TV at the end of service life Superior features of your integrated digital televisionChanging the plug Special Features Features of your new televisionMake Sure that all Important Safety InstructionsProduct, then it must be connected to a grounded socket Page Start Performing initial start and settingsBatteries TV Control Panel Your new televisionRear and Side External Connections TXT Swap Freeze Size PIP/POS Remote ControlTV controls Performing the initial power-on settingsPerforming Digital channel settings Turning on your television for the first time and tuningManual tuning of digital channels and storing in the memory Performing Analogue channel settingsElectronic TV Guide EPG Fine TuningIf you do not know the channel number Program table Selecting the Service TypeCreating and selecting favorites list Skipping a stored channel Relocating a stored channelDeleting a stored channel Locking a stored channelChannel List Signal InformationCA Module Conditional Access Active Antenna PowerPerforming the Sound settings Settings on your new televisionPerforming the Picture settings Perfect Clear DNR Noise reductionMpeg NR Vibrant ColourPerforming the timer settings Options menu settings Parental Control Other picture features Teletext Question Answer Button Reveal Temporary TV Picture UpdateFastext External Equipment Connections Connecting an external device via Scart connectionHeadphone Connection Connecting an external device via S-Video connection Connecting external equipment via AV connectionConnecting an external device via Ypbpr connection High Definition HD-READY Connecting an external device via Hdmi connectionPC connection HdcpInserting the CI Common Interface card Help and tips Failure Possible cause SolutionTFT Technical Specifications ChartMain UK Transmitter Stations Important notes Guarantee TelevisionWhat is covered? What is not covered?0845 600 HOW to Obtain ServiceV8K.801