ENGLISH
APPLICATION THREE: Two PSM200 Wireless Systems Used Simultaneously*
The following configuration uses two PSM200 systems simultaneously, and utilizes the SPLIT OUT feature of the TransMixer. In this exam- ple, the musicians keep the TransMixers on stage with them, in order to control their personal mixes independent of the house engineer.
1.Connect the vocal mic to INPUT 1 of the Vocal Mix TransMixer and connect SPLIT OUT 1 (the vocals) to the Mixing Console.
2.Connect the total band mix from the Mixing Console to INPUT 2 of the Vocal Mix TransMixer.
NOTE: In this example, the band mix includes vocals. This allows the guitar mix to include vocals, and allows the vocalist to independently control more of the vocal level in his/her personal mix.
3.Set the Vocal Mix P2T and P2R Receiver to the same frequency channel.
4.Connect SPLIT OUT 2 of the Vocal Mix TransMixer (the band mix) to INPUT 1 of the Guitar Mix TransMixer.
5.Connect the guitar amp simulator to INPUT 2 of the Guitar Mix P2T TransMixer.
6.Connect the SPLIT OUT 2 of the Guitar Mix TransMixer (the guitar amp simulator) to the Mixing Console.
7.Set the Guitar Mix P2T TransMixer and P2R Receiver to a frequency channel that’s different from the channel you set for the Vocal Mix system in step 3.
*Up to four systems can be used at the same time.
Vocal Mic |
| Band Mix | Guitar Mix |
|
SPLIT OUT |
| SPLIT OUT |
| |
from |
| from |
|
|
TransMixer | Vocal Mix | TransMixer |
| Guitar Amp |
|
|
|
| Simulator |
|
|
| DIRECT BOX |
|
|
| Band Mix |
|
|
| Vocal |
|
| Guitar Amp |
| Mic |
|
| |
|
|
| Simulator | |
|
|
|
| |
| Vocal | Mixing Console |
| SPLIT OUT |
| Guitar | from | ||
| Mix |
| ||
|
| Mix | TransMixer | |
|
|
|
RACK MOUNTING THE P2T
The P2T features a standard
WARNING: Do not torque the screws too tightly, or the chassis may be damaged.
Install Rack Ears
Single Unit
PSM200TransMixer
MIC/LINE1 | MIC/LINE2 | 1 INPUTS2 | CHANNSELECT |
Mount in an Equipment Rack
PSM200TransMixer
MIC/LINE1 | MIC/LINE2 | 1 INPUTS 2 | CHANNELSELECT |
|
|
| PSM200TransMixer |
|
|
| PSM200TransMixer |
MIC/LINE1 | MIC/LINE2 | 1 INPUTS2 | CHANNSELECT | MIC/LINE1 | MIC/LINE2 | 1 INPUTS2 | CHANNSELECT |
|
|
| PSM200TransMixer |
|
|
| PSM200TransMixer |
MIC/LINE1 | MIC/LINE2 | 1 INPUTS 2 | CHANNELSELECT | MIC/LINE1 | MIC/LINE2 | 1 INPUTS2 | CHANNSELECTEL |
NOTE: Be sure to use both straddle bars when installing dual units.
11