Bosch Appliances UML-422-90, UML-262-90 Connecting the PC Signal to the Monitor, Pin Description

32 en Installing the Monitor Full HD LCD Monitors

5.6Connecting the PC Signal to the Monitor

There are three ways to connect the PC signal to the monitor: HDMI, DVI, and VGA.

5.6.1HDMI Connection

Connect an HDMI cable (user-supplied) to the HDMI input on the bottom panel of the monitor.

Figure 5.6 HDMI Input

5.6.2DVI Connection

Connect a DVI-D cable (supplied) to one of the DVI-D inputs on the bottom panel of the monitor.

Figure 5.7 DVI Input

5.6.3VGA Connection

You can connect a PC signal to the monitor using the VGA connector on the rear panel and a VGA cable (D-SUB to D-SUB).

Figure 5.8 VGA Input

Pin	Description	Pin	Description	Pin	Description
1	Red Video	6	Red Ground	11	Ground
2	Green Video	7	Green Ground	12	SDA (for DDC)
3	Blue Video	8	Blue Ground	13	H-Sync or H+V Sync
4	Ground	9	N/A	14	V-Sync
5	Ground	10	Signal Cable Detect	15	SCL (for DDC)

F.01U.172.600 1.0 2010.10 User’s Manual Bosch Security Systems, Inc.