38 en Navigating the Monitor | Full HD LCD Monitors |
|
|
6.2Navigating the Monitor On-screen Display (OSD)
The
NOTICE!
When you are navigating through the OSD menus, use the Input or Enter button to select a menu and use the Menu button to exit a menu.
To navigate the set up menus, follow the steps below:
1.Connect the CVBS,
2.Press the Power button to turn on the unit (see Figure 6.1).
3.If required, press the Input or Enter button and the 
and
buttons until a signal is displayed.
4.Press the Menu button to activate the main menu selections (see Figure 6.1).
5.Press the 
and 
buttons to select a menu.
6.Press the 
button to enter the selected menu.
7.Press the 
and 
buttons to select a
8.Press the 
button to toggle the OSD values.
9.Press the Menu button to exit the selected menu and to return to the menu bar or to confirm a selection.
10.Press the Menu button again to exit the OSD menu bar.
F.01U.172.600 1.0 2010.10 | User’s Manual | Bosch Security Systems, Inc. |