MON170CL Instruction Manual Installation
5.4Connecting the Y/C (S-video) Signal to the Monitor
There is one (1)
NOTE: Both Y and C inputs are terminated with 75
4 | 3 |
| 1. GND | |
|
|
| 2. | GND |
|
|
| 3. | |
2 |
| 1 | 4. | |
|
|
|
Figure 3: Y/C Connection Pinout
5.5Connecting Audio to the Monitor
There is one (1) set of mini phone jack for the audio connector (Figure 2 and Photo F).
Photo F
5.6Connecting the Analog VGA Signal
to the Monitor
There is one (1)
Figure 4: Analog VGA Connector
EN 9
5.7VESA Standard Mounting Hole (For
Wall-mount Use)
1.Carefully press the cover and remove it from the stand. (as shown in photo G)
2.Unscrew the three holdings screws hidden under the high cover before separating the stand from the panel. (as shown in photo H)
3.The square mounting hole patterns are VESA standard on 100 mm (3.9 centers, as shown in photo I). Mount the unit to mounting device using the four mounting holes on the rear panel.
Photo G
Photo H
Photo I
Bosch Security Systems 6 July 2005