OPERATING INSTRUCTIONS
TO USE THE REMOTE CONTROL
POWER
Press to power ON/OFF (standby) TV. (Note:TV is never completely power off
unless physically unplugged.)
TV
Press to choose TV source mode directly.
VIDEO
Press repeatedly to toggle between AV and
HDMI/PC
Press to toggle between HDMI and PC source modes 。
Component Signal Press to choose
Component source mode directly.
0~9、1--
Press to enter channel numbers.
PRE CH
Press to display the previous channel
VOL
Press ∧ or ∨ to adjust the volume.
SOURCE:
Press to choose the input source : PC Signal input, HDMI input, Video input,
NICAM
Press to activate the TV sounds,
CH
Press to change TV channel up or down
“∧”,“∨”,“＜”,“＞”,
Press to adjust the various function items on the menu.
OK
Press to display the submenu
MENU:
Press to open or exit MENU.
WIDE
Press to choose the display aspect.
DISPLAY
Press to show the information about the input source or TV channel.
PICTURE
Press to switch the preset of video preset mode:
SOUND
Press to switch the preset of audio preset mode.
Sleep
Press to set sleep timer, setting 0~120 minutes before your TV turn off automatically.