Operating Instructions

To install the remote control batteries

1.Remove the battery cover. Insert two AAA batteries into the battery compartment. Make sure that you match the + and – symbols on the batteries with the + and – symbols in the battery compartment.

2.Point the remote controller directly to the remote receiving window on the

front casing of the main unit. In case of any barriers between the main unit and the remote controller, the remote controller may not work.

Note: To ensure safe operation, please do the following:

1.Use two AAA (#7) alkaline batteries.

2.Replace both batteries simultaneously.

3.Do not use a new battery together with an old one.

4.Avoid letting the remote come into contact with water or other liquids.

5.Do not place the remote controller in a humid or hot environment.

6.Do not drop the remote controller.

7.If the battery liquid leaks inside the remote controller, carefully clean the battery compartment and insert new batteries.

8.Improperly replacing batteries may also lead to an explosion hazard.

9.Dispose of used batteries according to the instructions on the battery.