Streamlined Installation: Try These Steps First!
Streamlined Installation: Try These Steps First!
This router is configured for the most common type of installation. To set up the router quickly, try performing the following steps. If you cannot complete a step, or if you want more information at any point, skip to the “1: Connect the Router to a PC” section on page 3, and complete the steps described in the other sections of this Quick Start Guide.
Step 1 Cable the router. Connect your PCs to the router, and connect the router to a DSL line.
Step 2 Connect the power. Connect the AC adapter to the router, and plug the AC adapter into a wall socket. Step 3 Start, or restart, a PC that is connected to the router.
Step 4 Start a web browser on the PC (Netscape version 3.0 to 4.7, or Internet Explorer version 4.0 or later,) and enter the URL http://10.10.10.1. The home page of the router should appear after 1 or 2 minutes.
Step 5 If you have no special configuration requirements, click the Router Setup link on the home page, and then click Quick Setup. (This may appear as Easy Setup on some models.)
Step 6 Enter the user name and password provided to you by your Internet service provider. Check the Test Connection box, and click Apply. (If no Test Connection box is present, click the Test Connection link after clicking Apply.)
Step 7 Click the Router Password link on the home page and set a password for the router.
Step 8 Select Start/Run, and type winipcfg in the Open field of the Run window. When the IP Config window appears, click Release. Then click Renew to release and renew the PC’s IP address. Alternatively, enter ipconfig /release to release the PC’s IP address, and then enter ipconfig /renew to renew the IP address of the PC.
Step 9 Open a web browser on the PC, and connect to a website. If you connected to a website, you have successfully completed the installation.
Step 10 If you could not connect to a website, see the “1: Connect the Router to a PC” section on page 3, and complete the steps described in the other sections of this Quick Start Guide.
This document describes the basic process of cabling and configuring the Cisco 800 and SOHO series routers.
Parts List
The shipment of your Cisco router includes the following items:
•One Cisco 827, 827H,
•One yellow Ethernet cable
•One lavender ADSL cable
•One light blue console cable
•One black power supply
•One black power supply cord
•One Cisco 800 and SOHO Series Product Documentation
If any of the items is missing or damaged, contact your customer service representative.
Cisco 820 Series and SOHO Series Routers Cabling and Setup Quick Start Guide
2 |
| |
|
