SETUP
This menu allows to select the language for the menus as well as the colour of the screen when there is no video input. It allows also to set an automatic
Display the Main menu by pressing MENU button.
Select the Options menu using the ⁄button. Press the OK button to confirm
Use the Ÿ / ⁄ buttons to select each option.
Menu language : To select the language for the menus.
Menu timeout : To set an automatic
Menu background : Select Opaque or Transparent type.
Sleep Timer : To set an automatic
Once the time is ended, TV set automatically switch on standby mode .
If you turn the TV on standby mode after setting the sleep timer, setting will be erased. Set it again.
Blue Screen : To have a blue screen when there is no video input or when the RF signal is very bad.
Using the ! / ÿ buttons select On.
Select Off if you do not want the blue screen.
Teletext language: Using ! / ÿ buttons, select the character set that wil be used for Teletext on this channel.
The following character sets are available: West Europe, East Europe, Cyrillic (Russia), Greek, Arabic, Persian,.
The character set determines how characters are displayed on Teletext screen.
Reset : Return to default settings. Press the OK button to return to default settings.
Press the EXIT button to exit the Options menu.
Note : this menu is removed automatically after a few seconds without using the remote control.
Note : You can display the remaining time before the automatic
press the sleep button .
To cancel the automatic | to |
display Sleep timer Off . |
|
14