AOC N32W551T, N27W551T user manual Remote control, Power, Turn the TV on

Page 6

3. Remote control:

Remove the cover of the battery compartment.

Insert the 2 batteries supplied (Type AAA 1.5V).

Please respect the environment and the relevant regulations. Before you dispose of batteries (or accumulators), ask your dealer whether they

require special recycling and if he is able to take them back. and if he is able to take them back

Precautions on using batteries:

-Only use the battery types specified.

-Make sure you use the correct polarity.

-Do not mix new and used batteries.

-Do not use rechargeable batteries.

-Do not expose batteries to excessive heat, throw them in a fire, recharge them or try to open them, as this could cause them to leak or explode.

-Remove the batteries from the remote control if you are not using it for a long period of time (several weeks).

4.Power :

Connect the female plug of the power cord to AC IN power input at the back of the set.

Then connect the male plug of the power cord to the wall outlet

Your TV set should only be connected to a 220 - 240 V ~ 50/60 Hz AC supply.

It must not be connected to a DC supply. If the plug is damaged, do not, under any circumstances, connect it to a mains socket, as there is a risk of electric shock.

5.Turn the TV on:

Press the On/standby button at the topside or on the front of the TV to turn it on,

the indicator in front turns green.

When TV set is in stand-by mode, the indicator in front of the TV illuminates amber.

5

Image 6
Contents LCD TV Table of Contents Safety Important InformationCare Switching on Place the TV on a solid surfaceRemote control PowerTurn the TV on Exit Operating InstructionMenu ~9 Digit ButtonsRED / Green / Yellow / Blue Subpage AccessText StopPreset choose between Personal, Vivid, Standard or Mild MenusMain Menu Audio Adjustments PIP/PAP Adjustments Automatic set-up Manual set-upButton Available Characters SpaceTo select input source in PIP/PAP mode Input SelectionTo select AV source Setup PC Mode PC SettingsControls ConnectionsMenu AV2 Scart socket Hdmi Socket High-Definition Multimedia Interface Page Before Calling Service