Apex Digital LD3249 user manual Rear Panel & Pedestal Removal

TV Overview

							Disassembly of TV Pedestal
							To remove the pedestal stand from
							the television, unscrew the (6) Philips
							head screws and slide the TV upward
							while securing the base.
									TV REAR PANEL
					2		AV2
		HDMI 3	HDMI 2	HDMI 1		1	AV1
1	2		3	4	5		6	7 8		9

Rear Panel & Pedestal Removal

9

1.Master Power ON/OFF Switch - When the master power is switched OFF, the power button located on the remote control and right side of the television will not function. Make sure it is switched ON for regular TV viewing on a daily basis.

2.AC Power Plug - Insert power plug during initial setup.

3.HDMI Inputs (3) - Connects to digital AV equipment that feature HDMI connectivity. HDMI supports enhanced high definition video and two-channel digital audio all from one cable. *Recommended for best performance

4.PC IN - VGA/Audio Input (3.5mm) - Connect an optional VGA cable from your personal computer and a 3.5mm audio cable for sound.

5.YPbPr 1/2 Inputs and R/L Audio Inputs (2) - Connect up to two (2) AV devices that feature component (YPbPr) video and audio output jacks.

6.AV 1/2 Inputs (2) - Connect up to two (2) standard AV devices to the composite VIDEO (Y) and AUDIO (L/R) output jacks found on most external video equipment.

7.S-Video - Connects to the S-Video output jack found on external video equipment. For audio, connect an AUDIO L/R cable to the L/R on AV1 adjacent to the S-Video input.

8.SPDIF - Connect an optional coaxial digital cable through a com- patible amp/receiver to enjoy superior audio sound.

9.RF Input - Connect antenna or cable for television reception.