Apex Digital LD3249 user manual Menu Adjustments

Menu Adjustments

In the SETUP menu you may adjust the position of images displayed on screen once you connect an input signal from your PC. Recom- mended resolution is 1280 x 1024. If your PC system uses a standard signal mode, the screen will adjust automatically. Connect an optional 3.5mm audio cable for stereo sound. See page 14 for details.

How to Navigate:

After connecting to a PC, press the INPUT button and highlight VGA, then press ENTER. Press the MENU button on the remote control and navigate using arrow t u buttons to select SETUP. Gain access to position adjustment options by pressing the down q arrow button to highlight Advanced, then press u arrow button to select from the following options.

• Highlight Clock. Navigate using the t u arrow buttons to control the width of the image.

Setup Menu

•Highlight H-Pos.Navigate using the t u arrow but- tons to adjust the position of images displayed from side to side.

•Highlight V-Pos.Navigate using the t u arrow but- tons to adjust the position of images displayed up and down.

•Highlight Phase. Navigate using the t u arrow buttons to improve focus and image stability.

•Highlight Auto. Press the u arrow button to automatically adjust the display to the best setting. When prompted, select Yes to confirm.

23

When prompted, Select “Yes” to confirm.