Apex Digital AVL2776 manual Connecting Video Equipment by using the RF Connector

Page 11

You can connect external video equipment, such as VCRs, camcorders etc. to your set. However please check with your manufacturers instruction booklets for specific information. Make sure that all appliances are unplugged before all con- nections are made. The diagrams shown may be different from your set.

1

Connecting Video Equipment by using the RF Connector

1.Connect the RF out from the external video equipment to the antenna socket on the back of the TV.

2.Connect the antenna cable to the RF antenna socket of the external video equipment.

3.Select channel 3 or 4.

2

Watching Off-Air or Cable TV

-For further information on cable TV, contact your local cable TV station.

1.Connect coaxial cable from your existing antenna or cable box to RF input socket located on the bottom left of the back panel

using supplied RF elbow adaptor.

1

2

For cable

TV

~

~

11

Image 11

Contents Page Regulatory Information Instructions SafetySafety Instructions Wall or Ceiling Mounting Damage Requiring ServiceReplacement Parts Safety CheckContents Mute Control Handset Remote Handset Control YPbPr l ControlsInput Select Back Panel ConnectionsConnecting Video Equipment by using the RF Connector For Good Performance How to connectHow to use Connection toFor Best Performance 480p Resolution Frequency Aspect Ratio Remarks 480iHighlight Contrast to Increase or Language English PIP Size PIP Position Reset MenuAdjustments Menu AdjustmentsHighlight Clock to stabilize the display TV Menu Change Password ADD/DEL ChannelPicture Menu640x350 37.861 85.08 31.469 70.08 Resolution Frequency KHz 31.468 70.09Resolution Frequency KHz 48.363 60.00 56.476 70.06 Horizontal Vertical75.000 1280x1024 63.981 60.02 Display Specification640x400 37.927 85.03 31.469 59.94 37.861 72.80 640x480 37.500 75.00 43.269 85.00 35.156 56.25 37.879 60.31Troubleshooting Problems Possible solutions PIP SpecificationsLimited North American Warranty Limited Warranty