Apex Digital AVL2776 manual Menu, Picture

In order to use the PIP feature you must take note of the input selected as the main (larger) picture. You should familiarize your- self with this page as not all inputs connected to the television are available using the PIP feature.

How to Picture-

PIP Mode

Your LCD TV can display the main signal and an auxillary signal input simultaneously.

The PIP signal appears in a small box within the screen when the PIP feature’s activated.

Refer to the chart at right as to the inputs allowed using PIP when viewing your main signal.

Main Signal

PIP Signal

To Activate PIP

While your main signal is on, press PIP on the remote control.

As an example, we will use TV as your main signal. While your main signal (TV) is displayed, press PIP from the remote. An OSD will appear with the source input options available to display in the PIP box.

Press “PIP-Input” on remote to select an input option.

Press “Swap” to change signal sources.

Press “PIP-SIZE” to change the size of your PIP image.

Press “PIP-POS” to reposition PIP image in other corners of your display.

PIP Modes That Function Together are Checked below:

PIP Signal

Main
Signal	TV	AV	SV	YPbPr	VGA	DVI
TV

AV

SVIDEO

YPbPr

1/2

VGA

DVI

IE: While in TV mode your PIP will display those signals connected to YPbPr, VGA and DVI only.

display menus	in-Picture
	Menu

21