Connecting Equipment

Coaxial (RF)

UsingYour Antenna or Digital Cable for DTV.

Using the Antenna or Cable for your

VCR

1.Turn off the HDTV.

2.Connect the coaxial (RF) connector from your antenna or digital cable (out-of- the-wall, not from the Cable Box) to the

ANTENNA/CABLE DIGITAL/ANALOG connector.

3.Turn on the HDTV.

4.Select TV using the SOURCE button on the remote, side of the HDTV or directly by pressing the TV button on the Remote Control.

UsingYour Antenna or Cable for DTV.

1.Turn off the HDTV.

2.Connect the coaxial (RF) connector from your antenna or cable (out-of-the-wall, not from the Cable Box) to the ANTENNA/ CABLE DIGITAL/ANALOG connector at the rear of the HDTV

3.Turn on the HDTV.

4.Select TV using the SOURCE button on the remote, side of the HDTV, or pressing the TV button on the Remote Control.

1.Turn off the HDTV and VCR.

2.Connect the “Output to TV”,“RF Out” or “Antenna Out” connector on the rear of your VCR to the ANTENNA/CABLE DIGITAL/ANALOG connector at the rear of the HDTV.

3.Turn on the HDTV and VCR.

4.Select TV using the SOURCE button on the remote, side of the HDTV or directly by pressing the TV button on the Remote Control.

NOTE

fIf you have an off-air antenna or cable TV, connect it to the “Antenna In” connector on the rear of your VCR.

ConnectingYour HDTV Set-Top Box

Using HDMI

HDTV Set-Top Boxes that have a HDMI digital interface should be connected to the HDMI input of the LCD HDTV for optimal results.