Preparation, Place the TV on a solid surface

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE

Note to the CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Please, make sure to connect the power plug to the wall outlet socket after connecting the TV to the adapter!

22.Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

SYMBOL		SYMBOL DEFINITION
	DANGEROUS	VOLTAGE:	The lightning	flash	with
	arrowhead symbol,within an equilateral triangle,is intended
	to alert the user to the presence of uninsulated “dangerous
SA 1965	voltage”within	the product’s	enclosure that	may be of
SA 1965	sufficient magnitude to constitute a risk of electrical shock to
	persons.
	INSTRUCTIONS: The exclamation point			within	an
	equilateral triangle is to alert the User to the presence of
	important operating and maintenance(servicing)instruction in
SA 1966	the literature accompanying the appliance.
SA 1966

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, Such as vases, Shall be placed on the apparatus. Caution - Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

PREPARATION

1. Place the TV on a solid surface.

Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover.

To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity.

Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping or splashing.

VOLTAGE:

PREPARATION

1. Place the TV on a solid surface.