AOC A20S431 manual Remote control, Power, Turn the TV on

Page 6

2.Insert the aerial plug firmly into the aerial socket at the back of the TV.

3.Remote control:

Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V).

4.Power:

Insert the power cord in the wall socket having an AC power supply.

5.Turn the TV on:

Turn the main power switch on the right side of TV to ON. Press the secondary power button in front of the TV to turn it on.

If the main power switch is OFF, the front LED light will also be OFF. If the main power is ON, the LED will be blue if the power is ON & orange if the power is in standby mode.

7

Image 6

Contents Page USER’S Manual Table of Contents Important Safety Instructions Read before operating equipmentPage Preparation Place the TV on a solid surfaceRemote control PowerTurn the TV on Operating Instructions ~9/100 Digit buttonsSound Setup To USE the MenusOSD Setup Setting will be removed when using reset TV SetupSleep Timer Caption ModeCC1~CC4Chip Setup Movie GuidelinesSetting up Movie Guidelines Picture Setup Connect Peripheral Equipment Front Panel Control KnobsPreparation If your VCR has an S-VHS video jack How to connectVideo Recorder Watching VCRDigital Camera How to useCAMERA, CAMCORDER, Video Game SET … HeadphoneMobile telephone warning TipsCare of the screen End of life directivesProduct Specification FeatureItems Specification OSD Before Calling Service Glossary