Ativa AT24OHP user manual First Setup, Quick Installation

English

First Setup

Thank you for purchasing this high performance monitor!

This monitor comes with the following accessories :

	Power cable		Audio cable
	D-Sub cable (15 pin)		User’s guide

DVI cable (Optional)

Quick Installation

1.Connect power cord

Connect the power cord to a properly grounded AC outlet, then to the monitor.

2.Connect analog video cable (D-Sub cable)

Make sure both monitor and computer are powered OFF. Connect the video cable (D-Sub cable) to the computer, then to the monitor.

3.Connect DVI cable (Optional)

Connect the DVI cable from DVI output of computer to the DVI input of the monitor.

4.Connect HDMI cable (Not supplied)

Connect the HDMI cable from HDMI output of computer to the HDMI input of the monitor.

5.Connect audio cable

Connect the audio cable from audio output of computer to the audio input of the monitor.

6.Power-ON computer and monitor

Power-ON the computer, then Power-ON the monitor.

7.Windows users: Setting the Timing Mode (Resolution and Refresh Rate)

Example: 1920 x 1080 @ 60 Hz

Resolution Right-click on the Windows desktop > Properties > Settings > “Desktop Area”. Set the resolution.

Refresh Rate (vertical frequency) See your graphic card’s user guide for instructions.

2