4.Names and Functions of Parts
4.1 Side View
The functions of the buttons are described as follows:
Sketch map | STANDBY: Press (Standby) to turn on and turn off. |
|
VOL.+/-
A.They are used as / buttons in the OSD Menu screen.
B.Press to adjust the volume.
CH.+/-
A.They are used as / buttons in the OSD Menu
screen.
B.Press to scan through channels. To scan quickly through channels, press and hold down either channels.
MENU: Press to display the menu. Press again to exit the menu.
SOURCE: Press to cycle display DTV, TV, AV,
YPbPr1, YPbPr2, VGA, and HDMI source.
When display the
4.2 Front View
Sketch map
(IR) Infrared Receiver: Receives IR signals from the remote control.
(Power on / Standby) LED: Press 
(Power) to
turn on and off. |
|
Indicator on (Red) | Standby mode |
Indicator on (Green) | Power on mode |
9