TV OPERATIONS ---- TV MENU ---- GEOMETRIC MENU
■Using the “Channel Name”
1Press Menu button, and then press or
button until the “TV” menu appears. 2 Press or button to highlight the
item.
3 Press Enter button to confirm, it will display “Channel Name” list.
4 Use , , or button for select, and move cursor to “OK”, the press Enter button for confirm you selection. If you want to cancel this operation, move cursor to “Cancel” and press Enter button for close this setting.
5 Press Menu or Exit button to return.
Note: It will be invalid if the current source is not TV.
Tuner Mode | Cable |
Searching | Press Enter |
TV | 55 |
Channel Skip | On |
Channel Name | Press Enter |
TVVideo | Selelect | ExitBack | AdjustEnter | ENTER |
|
| MENU |
|
■Selecting Channel
1 Press CH +/- button on the remote control to search the channels, the channel numbers will increase or decrease by 1 for each pressing excluding the skipped channels.
2Press number buttons 0~9 to select the corresponding channel content. If the channel number is bigger than 9, just press the two number buttons successively. If the channel number is bigger than 100, just press the three number buttons successively. The time interval should not exceed 2 seconds.
3If the channel number you pressed is bigger than the maximum channel number that the setting is permitted, the maximum numbered channel content will be remained.
■Channel Preview
Press Recall button to switch between present channel and previous channel. (Only for DTV or TV input source.)
Hot keys:
-You can also press Recall button on the remote control.
32