Peerless Industries PFT660, PFT640 manual Tools Needed for Assembly, Accessories, Table of Contents

Page 2

Note: Read entire instruction sheet before you start installation and assembly.

WARNING

Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please call Peerless customer care at 1-800-865-2112.

This product should only be installed by someone of good mechanical aptitude, has experience with basic building construction, and fully understands these instructions.

Make sure that the supporting surface will safely support the combined load of the equipment and all attached hard- ware and components.

Never exceed the Maximum UL Load Capacity. See page one.

If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs. Use of an "edge to edge" stud finder is highly recommended.

Always use an assistant or mechanical lifting equipment to safely lift and position equipment.

Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding power.

This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal injury.

This product was designed and intended to be mounted to the following supporting surfaces checked below with the hardware included in this product as specified in the installation sheet. To mount this product to an alternative support- ing surface, contact Peerless customer care at 1 800 865-2112.

This product was designed to be installed on the following wall construction only;

WALL CONSTRUCTION

ADDITIONAL HARDWARE REQUIRED

x

Wood Stud

None

x

Wood Beam

None

x

Solid Concrete

None

x

Cinder Block

None

 

Metal Stud

Do not attach except with Peerless accessory kit for metal studs;

 

 

Contact Customer Service for Peerless accessory kit for metal studs.

 

Brick

Contact Customer Service

 

Other or unsure?

Contact Customer Service

Tools Needed for Assembly

stud finder ("edge to edge" stud finder is recommended)

phillips screwdriver

drill

1/4" bit for concrete and cinder block wall

1/2" bit for metal stud wall

5/32" bit for metal or wood stud wall

level

Accessories

4 piece Metal Stud Fastener Kit (ACC 415) (Metal Stud not evaluated by UL)

2 piece Metal Stud Fastener Kit (ACC 215) (Metal Stud not evaluated by UL)

Table of Contents

 

Parts List

3

Installation to Double Wood Stud Wall

4

Installation to Triple Wood Stud Wall

5

Installation to Solid Concrete or Cinder Block

6

Installing Vertical Brackets

7

Installing Flat Panel Screen to Wall Plate

9

For customer care call (800) 865-2112 or (708) 865-8870.

 

2 of 27

ISSUED: 05-17-07 SHEET #: 202-9208-3 5-7-08

Visit the Peerless Web Site at www.peerlessmounts.com

For customer care call 1-800-865-2112 or 708-865-8870.

Image 2
Contents Features Model# Screen size range Max UL Load CapacityTable of Contents Tools Needed for AssemblyAccessories Parts List Installation to Double Wood Stud Wall Skip to onInstallation to Triple Wood Stud Wall Installation to Solid Concrete or Cinder Block View Incorrect CorrectInstalling Vertical Brackets For Flat Back Screen Mounting Flat Panel Screen Removing Flat Panel Screen10 de CaracterísticasEspañol Tabla de contenido Herramientas necesarias para el ensamblajeAccesorios 11 deLista de piezas 12 dePFT640 13 deProceda al paso 2 en la página 14 de15 de 16 de Instalación de los soportes verticalesNotas 17 de Precaución 18 deFrançais 19 surTable des matières 20 surListe des pièces 21 surInstallation sur un mur à doubles montants en bois 22 surInstallation sur un mur à triples montants en bois 23 sur24 sur Remarques 25 surPour les écrans à dos plat 26 sur27 sur Dépose de l’écran platPour monter l’écran avec une inclinaison de 5 ou 10º

PFT640, PFT660 specifications

Peerless Industries has established itself as a prominent provider of mounting solutions, particularly revered for its innovative products tailored to enhance the display experience in various settings. Among their noteworthy offerings are the Peerless PFT660 and PFT640, two versatile mounting solutions designed to meet the dynamic needs of commercial spaces, classrooms, and home entertainment environments.

The Peerless PFT660 is a full-featured floor stand that accommodates larger displays, making it ideal for modern conference rooms and public presentations. One of its standout features is its sleek, contemporary design that seamlessly integrates into any décor. The PFT660 supports a wide range of display sizes, from 50 to 80 inches, and has a robust weight capacity, ensuring stability and reliability even for heavier screens. Its adjustable height feature provides flexibility for various viewing preferences, allowing users to customize the screen's position for optimal visibility.

In contrast, the Peerless PFT640 offers a more compact solution suitable for medium-sized displays of 32 to 55 inches. This model is designed with portability in mind, making it easy to relocate as needed. The lightweight construction of the PFT640 does not compromise durability, as it is built from high-quality materials that ensure long-lasting performance. Similar to the PFT660, the PFT640 features a sleek and modern design, but with a smaller footprint that makes it perfect for smaller venues or spaces.

Both mounts leverage advanced engineering technologies to facilitate quick installation and easy setup. The cable management system integrated into both models allows for a clean and organized appearance, reducing clutter and improving aesthetics. Furthermore, both the PFT660 and PFT640 are designed to accommodate various media devices, including streaming players and laptops, catering to the needs of diverse users.

In summary, the Peerless PFT660 and PFT640 are exemplary mounting solutions that embody functionality, style, and versatility. With their user-friendly features, sturdy construction, and adaptability to a range of display sizes and environments, both models contribute significantly to the enhancement of visual engagement in any setting, ensuring that they meet the demands of today's technology-driven world effectively.