Peerless Industries PFT640, PFT660 manual Mounting Flat Panel Screen, Removing Flat Panel Screen

WARNING

•Always use an assistant or mechanical lifting equip- ment to safely lift and position the plasma television.

CAUTION

A

B A B

•Be careful not to pinch fingers when pushing screen from the bottom.

Mounting Flat Panel Screen

DETAIL 1

fig. 3.1

3To Mount Screen With No Tilt or 2° Tilt

Hook vertical brackets (B) onto wall plate (A) using top hooks for no tilt and bottom hooks for 2° tilt as shown in figure 3.3. Hooks of vertical brackets must be engaged securely onto wall plate as shown in detail 1, then slowly swing screen toward wall as shown in figure 3.1.

Screen can be adjusted horizontally if desired as shown in figure 3.4.

To Mount Screen With 5° or 10° Tilt

Remove wall support brackets and screws from vertical brackets as shown in figure 3.2. Hook vertical brackets (B) onto wall plate (A) using top hooks for 5° tilt and bottom hooks for 10° tilt as shown in figure 3.3. Hooks of vertical brackets must be engaged securely onto wall plate as shown in detail 1, then slowly swing screen toward wall as shown in figure 3.1.

Screen can be adjusted horizontally if desired as shown in figure 3.4.

FLAT 2° TILT 5° TILT 10° TILT

fig. 3.3

Removing Flat Panel Screen

4 To remove screen from mount, slowly swing bottom of screen away from wall and slightly push top of screen toward wall to disengage hooks on vertical brackets (B) from wall plate (A). Lift screen off of wall plate as shown in figure 4.1.

B

fig. 3.2

B

A

REMOVE

WALL SUPPORT

BRACKETS AND SCREWS

FOR 5° OR 10° TILT

fig. 3.4

fig. 4.1

9 of 27

Visit the Peerless Web Site at www.peerlessmounts.com

ISSUED: 05-17-07 SHEET #: 202-9208-3 5-7-08

For customer care call 1-800-865-2112 or 708-865-8870.

© 2008, Peerless Industries, Inc. All rights reserved. All other brand and product names are trademarks or registered trademarks of their respective owners.