Peerless Industries MIS374A manual Parts List, Tools Needed for Assembly

Page 2

Note: Read entire instruction sheet before you start installation and assembly.

WARNING

Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please call Peerless customer care at 1-800-865-2112.

This product should only be installed by a qualified professional.

Make sure that the column will safely support the combined load of the equipment and all attached hardware and components.

Never exceed the Maximum Load Capacity of 80 lb (36.3 kg).

Always use an assistant or mechanical lifting equipment to safely lift and position equipment.

Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding power.

Tools Needed for Assembly

phillips screwdriver

drill

1/4" bit for concrete

level

Parts List

 

MIS374A

Description

Qty

Part #

A column plate

1

201-1291

B Alligator® anchor

4

590- 0097

C #14 x 2-1/2" hex head wood screw

4

5S1-015-C03

D 1/4-20 x 1/2 phillips screw

2

510-9108

E 1/4" flat washer

2

540-9440

F 1/4" split washer

2

540-9402

D

B

C

A

EF

For customer care call (800) 865-2112 or (708) 865-8870.

2 of 4

ISSUED: 03-30-07 SHEET #: 124-9053-1

Image 2
Contents Installation and Assembly Column Mount Model MIS374AParts List Tools Needed for AssemblyInstallation to Solid Concrete Column Installation of ST 630 to Column Plate Tilt Assembly