Installation of ST 630 to Column Plate
Note: Model ST 630 is required for assembly.
Tilt assembly of ST 630 is required to complete step 2.
2 | Attach tilt assembly to column plate (A) using two |
washers (E). |
TILT
ASSEMBLY
A
E
F
D
Refer to Attaching Adapter Plate to Flat Panel Screen section of ST 630 instruction manual to complete assembly.
4 of 4 | ISSUED: |
© 2007, Peerless Industries, Inc. All rights reserved. All other brand and product names are trademarks or registered trademarks of their respective owners.