Peerless Industries ST650P-S, ST650-S Dd Ee, Installation to Solid Concrete or Cinder Block

Page 6

Installation to Solid Concrete or Cinder Block

WARNING

•When installing Peerless wall mounts on cinder block, verify that you have a minimum of 1-3/8" of actual concrete thickness in the hole to be used for the concrete anchors. Do not drill into mortar joints! Be sure to mount in a solid part of the block, generally 1" minimum from the side of the block. Cinder block must meet ASTM C-90 specifica- tions. It is suggested that a standard electric drill on slow setting is used to drill the hole instead of a hammer drill to avoid breaking out the back of the hole when entering a void or cavity.

•Concrete must be 2000 psi density minimum. Lighter density concrete may not hold concrete anchor.

•Installer must verify that the supporting surface will safely support the combined load of the equipment and all attached hardware and components.

1

Make sure that wall plate (AA) is level, use it as a

template to mark four mounting holes. The top mounting

slots should be located 6.2" (157.5 mm) above the desired screen center as shown in figure 1.1 page 5. Drill four 1/4" (6 mm) dia. holes to a minimum depth of 2.5" (64 mm). Insert anchors (EE) in holes flush with wall as shown (right). Place wall plate over anchors and secure with #14 x 2.5" screws (DD). Level, then tighten all fasteners.

WARNING

•Tighten screws so that wall plate is firmly attached, but do not overtighten. Overtightening can damage screws, greatly reducing their holding power.

•Never tighten in excess of 80 in. • lb (9 N.M.).

WARNING

•Always attach concrete anchors directly to load- bearing concrete.

•Never attach concrete anchors to concrete covered with plaster, drywall, or other finishing material. If mounting to concrete surfaces covered with a finishing surface is unavoidable, the finishing surface must be counterbored as shown below. Be sure concrete anchors do not pull away from concrete when tighten- ing screws. If plaster/drywall is thicker than 5/8", custom fasteners must be supplied by installer.

1

concrete

 

 

surface

 

 

EE

Drill holes and insert anchors (EE).

2

AA

 

DD EE

Place plate (AA) over anchors (EE) and secure with screws (DD).

3

Tighten all fasteners.

AA

EE

 

 

INCORRECT

VIEW

wall

concrete

plate

 

 

 

CUTAWAY

 

plaster/

 

dry wall

 

 

 

CORRECT

wall plate

concrete

 

plaster/

 

drywall

DD

6 of 27

Visit Peerless website at www.peerlessmounts.com

ISSUED: 11-21-07 SHEET #: 202-9255-2 02-22-08 For customer care call 1-800-729-0307 or 708-865-8870

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Features Models ST650, ST650-S, ST650P, ST650P-STools Needed for Assembly AccessoriesTable of Contents Parts List Non-SecurityAdapter Bracket FastenersSecurity Non-Security Security Adapter Bracket Fasteners Installation to Double Wood Stud Wall Skip to onInstallation to Solid Concrete or Cinder Block DD EEInstalling Adapter Brackets Screen MULTI-WASHER Screw For Flat Back ScreenFor Bump-out or Recessed Back Screen Screen MULTI-WASHER Spacer ScrewAdjusting the Tilt Angle of the Flat Panel Screen Mounting and Removing Flat Panel ScreenInstalación y ensamblaje CaracterísticasHerramientas necesarias para el ensamblaje Tabla de contenido AccesoriosSujetadores no aseguradores para los soportes adaptadores Lista de piezasAseguradora No aseguradora Sujetadores aseguradores para los soportes adaptadores Instalación en una pared con montantes de madera dobles CP = Centro DE LA PantallaVista EN Corte Nota Las dimensiones X deben ser iguales Instalación de los soportes adaptadoresPantalla Arandela Múltiple Tornillo Pantalla Arandela Espaciador Múltiple TornilloInstalación y desinstalación de la pantalla plana BB yAA BB y Ajustar el ángulo de inclinación de la pantallaModèles ST650, ST650-S, ST650P, ST650P-S CaractéristiquesTable des matières Accessoires Outils nécessaires au montageListe des pièces Sécurité Sans sécuritéFixations du support adaptateur avec sécurité Installation sur un mur à doubles montants en bois Passez à l’étape 2 à laInstallation sur du béton plein ou du bloc de béton Installation des supports adaptateurs RondelleÉcran Rondelle Tout Usage VIS Pour les écrans à dos platPour un écran à dos convexe ou concave Écran Rondelle Tout Entretoise Usage VISMontage et démontage d’un écran plat Réglage de l’inclinaison de l’écran plat

ST650-S, ST650P-S, ST650, ST650P specifications

Peerless Industries has long been a name synonymous with quality and innovation in the realm of mounting solutions. Among their standout offerings are the ST650P, ST650, ST650P-S, and ST650-S models, each designed to address specific user needs while maintaining the brand’s commitment to excellence.

The ST650 series is particularly notable for its versatility and user-friendly design, geared towards facilitating the installation of flat-panel displays in both residential and commercial settings. One of the main features of the ST650P model is its ability to accommodate a wide range of screen sizes, specifically designed for VESA compatibility, which makes it a flexible choice for various installations. The integrated cable management system ensures that all connections remain organized, creating a clean and professional appearance.

The ST650 model boasts a low-profile design that brings displays closer to the wall, thus providing a sleek aesthetic. Its robust construction can support heavier displays, delivering peace of mind to users concerned about mount durability. The model also features multiple mounting options, allowing installations on different surfaces, including drywall and concrete.

Moving to the variations, the ST650P-S and ST650-S models incorporate additional features aimed at enhancing user experience. The ST650P-S includes a pivoting arm that provides extended reach capabilities, allowing the screen to be positioned at an optimal viewing angle regardless of room layout. This is particularly beneficial in versatile spaces like conference rooms or living areas where seating arrangements frequently change.

On the other hand, the ST650-S model highlights a simplified installation approach. Peerless has designed this mounting solution with easy-to-follow instructions, decreasing the time and effort required for setup. The tool-free assembly feature is another significant advantage, enabling users to effortlessly adjust the mount as needed.

All models in the ST650 series are constructed using high-quality materials, ensuring both strength and durability. With advanced technologies such as tilt and swivel capabilities, users can easily adjust their displays for glare reduction and improved viewing angles.

In summary, the ST650P, ST650, ST650P-S, and ST650-S models from Peerless Industries represent the pinnacle of display mounting technology. Their diverse features, ease of use, and robust design solidify their position as ideal solutions for anyone looking to enhance their visual display experience.
Top Page Image Contents