Controlling the camera
This function is used to control the cameras connected via
PTZ control using the menu
User Menu
6 PTZ Control
step 1
1Go to PTZ Control
step 2
Zoom, iris, focus adjustment, AutoPan
step 3
Preset
step 4
2Select PTZ Camera
step1. Pan or tilt the PTZ camera connected.
•Click the gray area by using the mouse to adjust the camera angle.
|
|
|
| adjusts the camera angle | ||
|
|
|
| in the upward direction | ||
adjusts the |
|
| adjusts the | |||
| ||||||
|
| camera angle | ||||
camera angle |
|
| ||||
|
| in the rightward | ||||
in the leftward |
|
| ||||
|
| direction | ||||
direction |
|
|
|
| ||
|
|
|
|
|
| |
|
| adjusts the camera angle | ||||
|
|
|
| |||
|
|
|
| |||
|
|
|
| in the downward direction | ||
step2. Adjust zoom, iris, and focus. And activate auto pan. step3. Preset the viewing points 1 to 16.
•The preset points are registered to the PTZ camera for auto pan function.
step4. Switch the camera number to be controlled.
•The camera number to be controlled appears on the LCD display on the front panel.
PTZ CAM1
<PTZ Control> can be set using the mouse only. You can- not set it using front panel buttons.
PTZ control using the front panel buttons
step1. Press the camera number button of the PTZ camera number to be controlled and display the picture in the single screen display.
step2. Press the PTZ button.
•The unit switches to PTZ mode and the button lights up. “PTZ” appears on the LCD display on the front panel during PTZ mode.
PTZ
•The camera number to be controlled appears on the LCD display on the front panel.
PTZ CAM1
step3. Control the camera.
Tilt: Press the TILT 
button to tilt the camera in the upward direction. Press the TILT 
button to tilt the camera in the downward direction.
Pan: Turn the SHUTTLE ring to the right to pan the camera in the rightward direction. Turn the SHUTTLE ring to the left to pan the camera in the leftward direction.
Camera zoom: Press the CAMERA ZOOM button and then turn the JOG dial to the left (wide) or right (tele) to adjust the camera zoom.
Focus: Press the FOCUS button and then turn the JOG dial to the left (far) or right (near) to adjust the focus of a camera.
Iris: Press the IRIS button and then turn the JOG dial to the left (close) or right (open) to adjust the iris of a camera.
Preset: Press the PRESET button and then press the camera number buttons within 3 seconds to preset the viewing points. Up to 16 points can be set.
Auto pan: Press the AUTO PAN button to activate the auto pan function of the camera.
During PTZ operation using front panel buttons, POWER button and functions related to playback do not work. Fur- thermore, menus cannot be displayed.
14