Communications by Web Browser, Live Monitoring

Communications by Web Browser (continued)

Live Monitoring

Retrieves live pictures and displays the pictures on the PC screen.

step1. Select “Live Monitoring” and left-click.

• The “[Live]” screen appears.

When picture acquisition is tried for the first time with the Web browser of a personal computer, a message as shown below may be displayed. If it is displayed, click “Yes.”

When the unit is recording at the full rate (100 pps), the picture supplied from the camera which is not used for recording at that time is not updated.

STOP	: Stops the retrieval of an picture.
GO	:	Starts (or restarts) the retrieval of an pic-
		ture.
Display	:	For selecting either the display or non-
		display of a camera number.
Layout	:	For selecting from the 12 types of display
		patterns.
		(default: 4(1-4) screen)
Camera	: Selects the camera number that you want
		to display and check.
Transfer Rate	:	Selects one of 5 stages from “Lo” to “Hi”
		for picture retrieval speed.
		(default: middle)
Save Layout	:	The layout of the screen display is regis-
		tered to “Local PC.”
Main Menu	: Returns to the “Main Menu.”
Logout	:	For logging out.

Setting “Transfer Rate” to “Hi” may present a problem to the PC operations. This could be due to the PC’s hardware/software performance you are using. Adjust the image transfer rate that best meets your machine.

Depending on the network capacity and the load conditions, the transfer rate may be affected.

Picture may vibrate vertically when displaying the live picture of the camera of which picture is set for frame recording.

Communications by Web Browser (continued)

Live Monitoring

STOP