Recommended use
Safety Precautions and Maintenance
FOR OPTIMUM PERFORMANCE, PLEASE NOTE
THE FOLLOWING WHEN SETTING UP AND
USING THE ACCUSYNC LCD COLOUR MONITOR:
¥DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel.
¥Do not spill any liquids into the cabinet or use your monitor near water.
¥Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage points, which can be harmful or fatal or may cause electric shock, fire or equipment failure.
¥Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fire.
¥Do not place this product on a sloping or unstable cart, stand or table, as the monitor may fall, causing serious damage to the monitor.
¥When operating the LCD monitor with its AC
¥In U.K, use a
¥Do not place any objects onto the monitor and do not use the monitor outdoors.
¥The inside of the fluorescent tube located within the LCD monitor contains mercury. Please follow the bylaws or rules of your municipality to dispose of the tube properly.
¥Do not bend power cord.
¥Do not use monitor in high temperature, humid, dusty, or oily areas.
¥Do not cover vent on monitor.
Immediately unplug your monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions:
¥When the power supply cord or plug is damaged.
¥If liquid has been spilled, or objects have fallen into the monitor.
¥If the monitor has been exposed to rain or water.
¥If the monitor has been dropped or the cabinet damaged.
¥If the monitor does not operate normally by following operating instructions.
¥If monitor or glass is broken, do not come in contact with the liquid crystal and handle with care.
¥If you notice any structural damage such as cracks or unnatural wobbling.
| ¥ | Allow adequate ventilation around the monitor so that heat can properly dissipate. Do not block | |
|
| ventilated openings or place the monitor near a radiator or other heat sources. Do not put anything on | |
CAUTION |
| top of monitor. | |
¥ | The power cable connector is the primary means of detaching the system from the power supply. The | ||
| |||
|
| monitor should be installed close to a power outlet, which is easily accessible. |
¥Handle with care when transporting. Save packaging for transporting.
¥Image Persistence: Image persistence is when a residual or ÒghostÓ image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitorsÕ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided.
To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.
NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.