Front Panel Controls
DVD 22
1 3 4 5 6 7 82
Main Information Display | 3 Play | 6 Skip/Search (Previous) |
1 Power On/Off (Standby) | 4 Pause | 7 Skip/Search (Next) |
2 Eject | 5 Stop | 8 Dimmer |
Main Information Display: This display delivers messages and status indications to help you operate the DVD player.
1Power On/Off (Standby): Press the button once to turn the DVD player on, press it again to put the unit in the Standby mode.
2Eject: Press this button to open or close the Disc Tray.
3Play: Press to initiate playback or to resume playback after Pause has been pressed.
4Pause: Press this button to momentarily pause playback. To resume playback, press the button again. If a DVD is playing, action will freeze and a still picture will be displayed when the button is pressed.
5Stop: Press this button once to place the disc in the Resume mode, which means that playback will stop, but as long as the tray is not opened or the disc changed, DVD playback will continue from the same point on the disc when the Play Button is pressed again. Resume will also work if the unit was turned off. To stop a disc and have play start from the beginning, press the button twice.
6Skip/Search (Previous): Press this button to move backward through the music tracks on a CD disc or the chapters on a DVD disc. Keep the button pressed to search backwards at one of the available speeds.
7Skip/Search (Next): Press to move forward through the music tracks on a CD or the chap- ters on a DVD disc. Keep the button pressed to search forwards at one of the available speeds.
8Dimmer: Press this button to reduce the brightness of the Information Display by 50% or to turn the display off completely in the following order: FULL BRIGHTNESS ➔ HALF BRIGHTNESS ➔ OFF ➔ FULL BRIGHTNESS.