Harman-Kardon DVD 38 manual Repeat Play, Angle Button

OPERATION

material is available, if the Show Angle Icon setting in the SYSTEM SETUP menu has been set to On, the Multiple Angle Icon will appear on screen briefly at the beginning of the passage where multiple camera angles are available, and the Angle Indicator will light in the front panel Information Display.

When multiple angle views are available, press the Angle Button to change the view. See Figures 41 and 42. The current angle number and total available angles will be displayed. Each press of the Angle Button will change the current camera angle. If you press the Angle Button during a section without multiple views, onlly one view will be available.

Figure 41 – Angle Button

Figure 42 – Angle Banner

When your desired selection appears, press the ‹/› Navigation Buttons until Done is highlighted and then press the Enter Button to remove the banner display and return to normal playback.

Repeat Play

The DVD 38 offers several repeat functions that allow you to take advantage of the capacity of the unit for unattended playback. Press the Repeat button once to display the Repeat Message on-screen. See Figure 43. Press the Repeat Button again to cycle through the options.

1.Press the A-B Repeat Button (see Figure 44) on the remote when you want to choose the beginning point; the “REPEAT A-” message will appear on screen. The “A” indicator will light in the front-panel display.

2.Press the A-B Repeat Button again to choose the end point. Repeat A-B has been set, and the A-B section will be played continuously. See Figure 45.

Figure 45 – Repeat A-B Message

3.Press the A-B Repeat Button on the remote again to cancel Repeat A-B mode.

Figure 43 – Repeat Message

•Repeat 1: Repeats the DVD chapter or DVD-Audio track currently being played until the disc is manually stopped. The Repeat (“Rep.”) indicator will light in the front-panel display, and the Chapter or Track indicator will flash.

•Repeat Title or Group: This mode repeats the title or group currently being played until the disc is manually stopped. The Repeat (“Rep.”) indicator will light in the front-panel display, and the Title or Group indicator will flash.

A-B Repeat Play

The Repeat A-B function allows you to select any portion of a DVD- Video disc and have it repeat continuously until stopped.

To initiate a Repeat A-B playback sequence, follow these steps while a disc is playing:

Figure 44 – A-B Repeat Button

38