Harman-Kardon DVD 38 Appears Selection, Incorrect OSD language, Language Menu Ø symbol appears

TROUBLESHOOTING GUIDE

SYMPTOM	CAUSE	SOLUTION
Some remote buttons do not operate	• Function not permitted at this time	• With most discs, some functions are not permitted at certain
during DVD play; prohibited symbol		times (e.g., Track Skip) or at all (e.g., direct audio track
Ø appears		selection).
The OSD menu is in a foreign	• Incorrect OSD language	• Change the display language selection in the SYSTEM SETUP
language		menu.
The Ø symbol appears	• Requested function not available	• Certain functions may be disabled by the DVD itself during
	at this time	some passages of a disc.
Picture is displayed in the	• Incorrect match of aspect-ratio	• Change aspect-ratio settings.
wrong aspect ratio	settings to disc
Disc will not copy to VCR	• Copy protection	• Many DVDs are encoded with copy protection to prevent
		copying to VCR.

Password not accepted	• Incorrect password being used or
	password has been forgotten

•Stop play of disc and clear all displays from screen. Press and hold Clear Button until the display blinks.

This resets the password and all settings to their defaults. You will need to reenter all audio, video and system settings.

Screen Saver not activated	• Screen saver will not activate when
	cursor is in column of icons on left
	side of screen

•Move cursor to main disc information or playlist area to avoid burn-in on plasma and CRT displays.

Cannot program playlist	• Programmed play is not available for
	all disc types
	• DVD 38 must be in Stop mode to
	program a playlist

•Programmed play is available only for CDs.

•Stop play of disc before programming a playlist.

In addition to the items shown above, additional information on troubleshooting possible problems with your DVD 38, or installation-related issues, may be found in the list of "Frequently Asked Questions" which is located in the Product Support section of our Web site at www.harmankardon.com.

46