Instead | Harman-Kardon HKTS 2 manual

Rear Panel Connections

Phase Switch: This switch determines whether the subwoofer’s piston-like action moves in and out in phase with the main speak- ers. If the speakers were to play out of phase, the sound waves produced by the subwoofer would be cancelled out, reducing bass response. This phenomenon depends in part on the rela- tive placement of the speakers in the room. In most cases, the Phase Switch should be left in the NORMAL position. However, it does no harm to experiment with the Phase Switch

,and you may leave it in the position that maximizes bass response.

Line-Level Subwoofer (SUB) Input: Con- nect the subwoofer output of a receiver with digital surround sound decoding, such as Dolby* Digital or DTS®, to this input. This input bypasses the subwoofer’s internal crossover circuitry, and should only be used with a filtered signal. If your receiver does not have digital decoding, you should use the Line-Level Full-Range Inputs

instead.

Line-Level Full-Range Inputs: Connect the line-level subwoofer output or preamp out- put(s) of your receiver or amplifier to these inputs. If your receiver does not have a separate subwoofer output, use a Y-adapter (not supplied) to bridge the receiver’s preamp output to the main amp input for that channel, and connect the long end of the adapter to the correspon- ding line-level input on the subwoofer. If your receiver has only a single subwoofer output, you may connect it to either the left or right line- level input on the subwoofer, and no Y-adapter is needed.

Speaker-Level Outputs: If you are using the Speaker-Level Inputs on the subwoofer, you should connect these binding- post terminals to your front left and right speak- ers, remembering to maintain polarity by con- necting the (+) terminal on the subwoofer to the

(+)terminal on the speaker, and the (–) terminal on the subwoofer to the (–) terminal on the speaker. If you are not using the Speaker-Level Inputs , then connect your front left and right speakers directly to your receiver or amplifier. See pages 9 through 12 for further information on speaker connections.

Speaker-Level Inputs: Connect these binding-post terminals to the main left and right speaker terminals of your receiver or amplifier, if your receiver or amplifier does not have a line- level subwoofer output. Remember to maintain polarity by connecting the (+) terminal on the receiver/amplifier to the (+) terminal on the sub- woofer, and the (–) terminal on the receiver/ amplifier to the (–) terminal on the subwoofer.

Master Power Switch: Place this switch in the “•” position to power-on the subwoofer. The subwoofer will then be either in the Standby mode or completely on, depending on the position of the Trigger On/Off Switch .

AC Power Cord: Make sure to plug this cord into an active, unswitched electrical outlet for proper operation of the subwoofer.

The cord should not be plugged into the accessory outlets found on some audio components.

REAR PANEL CONNECTIONS 5

HKTS 2 specifications

The Harman-Kardon Home Theater System, specifically the HKTS 2, is designed for those seeking an immersive audio experience in the comfort of their own homes. This system perfectly blends style and performance, fulfilling the needs of both casual viewers and audiophiles alike. The HKTS 2 is engineered to deliver a stunning sound experience that enhances movies, music, and gaming.

One of the standout features of the HKTS 2 is its compact yet powerful satellite speakers. The system includes four satellite speakers that boast a sleek design and can be wall-mounted for added convenience. This not only saves space but also allows for optimal placement to achieve the best sound distribution throughout the room. The dedicated 100-watt powered subwoofer provides deep, rich bass to complement the crisp highs and mid-range tones of the satellite speakers.

The tower of power in this system comes with the Harman patented technologies such as the HARMAN Bass Boost, which ensures that the subwoofer fully captures low frequencies, providing an exhilarating and immersive audio experience. The HKTS 2 is also equipped with advanced signal processing that enhances audio performance, enabling users to enjoy clarity and detail in their audio playback.

Another noteworthy aspect of the HKTS 2 is its compatibility with various sound formats. The system supports Dolby Digital and DTS formats, which are essential for experiencing the full audio landscape of today's blockbuster films and thrilling video games. Additionally, the speaker configuration is designed to create a true 5.1 surround sound experience, immersing listeners in a three-dimensional soundstage.

Setup is a breeze with the HKTS 2. It comes with all necessary cables, including color-coded wiring for easy connections, making it straightforward even for those who may not be technically savvy. The system is also aesthetically pleasing, with a stylish finish that complements modern home décor.

In summary, the Harman-Kardon HKTS 2 Home Theater System brings cinematic sound quality into the home with its powerful subwoofer, sleek satellite speakers, and advanced audio technologies. Whether for movie nights, gaming marathons, or simply enjoying your favorite tunes, the HKTS 2 provides an exceptional auditory experience that makes every moment memorable.